select Compare (0)
Compare Products

You have no items to compare.

Pentek PS1-10C Sediment Water Filters (9-3/4-inch x 2-3/8-inch)

More Views

Pentek PS1-10C Sediment Water Filters (9-3/4-inch x 2-3/8-inch)

$3.99 (Retail Price: $5.99 )

In stockShips Today, Aug 04th

    • Quantity
    • Unit Price
    • 1 - 2
    • $3.99
    • 3 - 5
    • $3.89
    • 6 +
    • $3.79
The Pentek PS1-10C water filters reduce extra fine dirt, sand, sediment, silt, rust particles, and scale particles. The Pentek PS1-10C water filter is resistant to chemicals and corrosion. The Pentek PS1-10C filter cartridge is designed for purity, bacteria resistance, and chemical resistance. The Pentek PS1-10C spun fibers form a true gradient density from outer to inner surfaces. The Pentek PS1-10C replacement water filter will not impart taste, odor or color to the liquid being filtered when used within the recommended temperature limit. The Pentek PS1-10C water filters can be used on chlorinated or non-chlorinated water supplies. NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The Pentek PS1-10C filter is a 1 micron extra fine sediment water filter cartridge made of spun bonded polypropylene. Pentek PS1-10C water filters are manufactured from 100% pure polypropylene. The Pentek PS1-10C water filter cartridges fit in whole house water filter systems and Reverse Osmosis Systems.
  • Genuine OEM Product
Reduces the following contaminants:
  • The PENTEK-PS1-10C does not reduce fluoride
Used In Brands American Plumber, Ametek, Aqua-Pure, Culligan, Cuno, Flotec, GE, Honeywell, Kleen-Plus, Master Plumber, OmniFilter, Pentek, Sears, Teledyne, TrueValue, US Filter, Waterpik
Manufacturer's Id PS1-10C
UPC 051678690437
Advertised Size (in) 10 x 2-1/2
Actual Size (in) 9 3/4 inches (length) x 2 3/8 inches (outside diameter)
Actual Size (cm) 24.77 x 6.0325
Media Spun Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (gallons) 8,000
Filter Life (liters) 30,283.28
Filter Life (months) 2 months
Micron Rating (Nominal) 1
Operating Temperature (°F) 40 - 145
Operating Temperature (°C) 4.4 - 62.8
Flow Rate (gpm) 5.00
Flow Rate (lpm) 18.93
  • Pentek PS1-10C Water Filter Replacement Information:
  • The Pentek PS1-10C replacement water filter is easy to install in whole house systems or reverse osmosis systems.
  • Replace the Pentek PS1-10C sediment water filter cartridge approximately every 2 months or 8,000 gallons of water.
  • Pentek PS1-10C Water Filter Equivalent Brands:
  • The following Culligan models can use the Pentek PS1-10C filter cartridge:  HF-150, HF-160, HF-360, HF-365, RO-2127.
  • The following Ametek, USFilter, and Plymouth Products models can use the Pentek PS1-10C sediment filter cartridge: #10 Blue, #10 Clear.
  • The Pentek PS1-10C Sediment Water Filter Cartridge fits Culligan, Cuno, AquaPure, Omni, Sears, Fulflo, Teledyne WaterPik, Ace, Master Plumber, Flotec, Honeywell, General Electric, American Plumber, and most other water filter housings for 10" x 2.5" filters
  • Pentek PS1-10C = Culligan/USFilter/Ametek/Kleen-Plus PS1-10C, Sears 34362, American Plumber W5P, Ace Hardware 45331, MasterPlumber TrueValue 529-286, Flotec RS3, GE FXUSC.
No reviews have been found

Write Your Own Review

You're reviewing: Pentek PS1-10C Sediment Water Filters (9-3/4-inch x 2-3/8-inch)

  •  
    1 star
    2 stars
    3 stars
    4 stars
    5 stars
    Rating
  • * Required Fields