Larger View
|
|
- Pentek ST-BC-4 Stainless Steel Water Filter Housing:
- The Pentek ST-BC-4 stainless steel water filter housing offers a variety of solutions for your large-scale, heavy-duty filtration needs.
- Simple to install and maintain, this housing is ideal for schools, restaurants, farms, institutions and industrial use.
- Durable construction
- The Pentek ST-BC-4 water filter housing is constructed of 304 stainless steel with a gray-silver epoxy finish.
- Drains on both the “clean” and “dirty” sides of the sump are included.
- Pentek ST-BC-4 Stainless Steel Housing Specs:
- ST-BC-4 Maximum Temperature: 300°F (149°C)
- ST-BC-4 Initial ΔP (psi) @ Flow Rate (gpm): 28 gpm (106 L/min)
(Based on sediment removal with a 25-micron filter cartridge and 1 PSIG initial clean pressure drop)
- ST-BC-4 Maximum Pressure: 125 psi (8.62 bar)
- ST-BC-4 Pipe Size: 2" (50.8 mm)
- ST-BC-4 Dimensions: 19-1/4" L x 10" W (489 mm x 254 mm)
- Pentek ST-BC-4 Stainless Steel Housing Materials of Construction:
- Housing: Brushed 304 Stainless Steel
- Finish: Epoxy
- Sealing Gasket: Buna-N
- Pentek ST-BC-4 Stainless Steel Replacement Filter Housing:
- The Pentek ST-BC-4 water filter housing uses 10 inch standard double open end (DOE) water filter cartridges.
- The Pentek ST-BC-4 water filter housing holds four 10" x 2.5" double open end cartridges.
- The Pentek ST-BC-4 water filter housing will not accept model GAC, CC, CGAC, TSGAC, WS, PCF or PCC series cartridges.
- Maximum cartridge diameter 3" (76 mm)
- Filter cartridge life depends on the water filter cartridge purchased
- Filter cartridges not included
- Pentek ST-BC-4 Parts & Accessories:
- The Pentek 143218 is the replacement o-ring for the Pentek ST-BC-4 housing. One o-ring is included with the ST-BC-4 housing. The o-rings should be replaced periodically to maintain a good seal.
- The Pentek 143221 is the replacement belly clamp for the Pentek ST-BC-4 housing. One belly clamp is included with the ST-BC-4 housing and only needs to be replaced if it breaks.
- The Pentek ST-BC-4 Housing is Also Known As:
- American Plumber, Ametek, Pentek, USFilter 156025, 156025-02, 15602502 Stainless Steel Housing
- American Plumber ST-BC-4 Stainless Steel Housing
- Ametek ST-BC-4 Stainless Steel Housing
- US Filter ST-BC-4 Stainless Steel Housing
- Pentek ST-BC-4 Stainless Steel Filter Housing Instructions:
- If pressure exceeds 125 psi (8.62 bar) at any time, a pressure regulator must be used.
- Do not use water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- Protect against freezing to prevent cracking of the filter and water leakage.
- Not recommended for applications with TDS or chlorides >1000 ppm and/or pH <5.0. Use of this product in these conditions will void the limited warranty. Consult
factory for product modifications for these conditions.
|