 Larger View
Retail Price: $1,092.49
|
|
- Pentek ST-BC-8 Stainless Steel Water Filter Housing:
- The Pentek ST-BC-8 housing holds either eight 10" x 2.5" cartridges OR four 20" x 2.5" double open end cartridges.
- The Pentek ST-BC-8 stainless steel housing is easy to install and maintain.
- The Pentek ST-BC-8 steel water filter housing is useful for large-scale, heavy-duty filtration needs.
- The ST-BC-8 housing is very durable and can be used for schools, restaurants, farms, institutions and industrial use.
- The ST-BC-8 filter housing is constructed of 304 stainless steel with a gray-silver epoxy finish.
- There are drains on both the “clean” and “dirty” sides of the housing sump.
- Pentek ST-BC-8 Steel Filter Housing Specs:
- ST-BC-8 Maximum Temperature: 275°F (135°C)
- ST-BC-8 Initial ΔP (psi) @ Flow Rate (gpm): 56 gpm (212 L/min)
(Based on sediment removal with a 25-micron filter cartridge and 1 PSIG initial clean pressure drop) - ST-BC-8 Maximum Pressure: 125 psi (8.62 bar)
- ST-BC-8 Pipe Size: 2" (50.8 mm)
- ST-BC-8 Dimensions: 29" L x 10" W (737 mm x 254 mm)
- Pentek ST-BC-8 Steel Filtration Housing Materials of Construction:
- Housing: Brushed 304 Stainless Steel
- Finish: Epoxy
- Sealing Gasket: Buna-N
- Manufacturer: Pentek 156026-02
- Pentek ST-BC-8 Stainless Steel Replacement Filters:
- The Pentek ST-BC-8 housing uses either 10 inch standard OR 20 inch standard double open end (DOE) water filter cartridges.
- The Pentek ST-BC-8 housing holds either eight 10" x 2.5" cartridges OR four 20" x 2.5" double open end cartridges.
- The ST-BC-8 holds 4 x 2 10" Standard cartridges OR 4 x 1 20" standard cartridges. (This refers to the number of cartridges which are configured around the housing times the number of cartridges that may be stacked. For example, 4 x 2 means that cartridges are configured four around and two high for a total of eight cartridges.)
- The ST-BC-8 housing cannot accept model GAC, CC, CGAC, TSGAC, WS, PCF or PCC series cartridges.
- The maximum cartridge diameter is 3" (76 mm).
- The water filter cartridge life depends on the water filter cartridge purchased.
- The filter cartridges are not included. Select the water filter cartridges that best meet your needs.
- Pentek ST-BC-8 Parts & Accessories:
- The Pentek 143218 is the replacement o-ring for the Pentek ST-BC-8 housing. One o-ring is included with the ST-BC-8 housing. The o-rings should be replaced periodically to maintain a good seal.
- The Pentek 143221 is the replacement belly clamp for the Pentek ST-BC-8 housing. One belly clamp is included with the ST-BC-8 housing and only needs to be replaced if it breaks.
- The Pentek ST-BC-8 Housing is Also Known As:
- American Plumber, Ametek, Pentek, USFilter 156026, 156026-02, 15602602 Stainless Steel Housing
- American Plumber ST-BC-8 Stainless Steel Housing
- Ametek ST-BC-8 Stainless Steel Housing
- US Filter ST-BC-8 Stainless Steel Housing
- Pentek ST-BC-8 Stainless Steel Filter Housing Instructions:
- If pressure exceeds 125 psi (8.62 bar) at any time, a pressure regulator must be used. Do not use water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- Protect against freezing to prevent cracking of the filter and water leakage.
- Not recommended for applications with TDS or chlorides >1000 ppm and/or pH <5.0. Use of this product in these conditions will void the limited warranty. Consult factory for product modifications for these conditions.
|
Features
