Water Filter View Cart MY ACCOUNT |  EXPRESS REORDER  |  ORDER STATUS  |  SITE MAP  |  Water Filter View Cart HELP |  Water Filter View Cart CART
Water Filters Free Shipping HACKER SAFE certified sites prevent over 99.9% of hacker crime.
Water Filters made EASY at
Easy To Find Water Filters

Water Filters Home > Whole House Water Filters > NCP-10 Water Filter


Pentek / Ametek / Culligan /
Kleen Plus / Plymouth Products /
Pentair / American Plumber /
US Filter NCP-10 Water Filter

10 Micron
9-3/4" x 2-1/2" (248 mm x 64 mm)


Culligan NCP-10 water filter and Ametek NCP10 replacement carbon water filter

NCP-10 Product Manual
(Download Adobe Reader)

Product Code: NCP-10 (Pentek Label)
One Case Includes 24 Filters

Quantity Discounts
1 Filter $7.99 each
2 - 3 Filters $6.99 each
4 - 7 Filters $6.49 each
8 - 23 Filters $6.24 each
24 + Filters $5.99 each

Enter Quantity: 





 Help Me Order!

 Find My Filter!

 Whole House System

HF-360 Whole House Housing for the NCP-10 Carbon Water Filter
Recommended
Whole House System
for the NCP-10 water filter
  • Pentek / Culligan NCP-10 Water Filter:
  • Nominal 10 micron Non-Cellulose Carbon-Impregnated Pleated Water Filter Cartridges
  • Culligan NCP-10 filters produce healthier, better-tasting drinking water
  • Non-cellulose media resists bacterial attack
  • Provides sediment filtration and chlorine taste & odor reduction
  • Pleated for maximum dirt-loading capacity
  • Pentek NCP-10 cartridges are constructed from a carbon-impregnated non-cellulose media.
  • They offer sediment-filtration, as well as taste, odor and chlorine taste and odor reduction in one cartridge. Unlike cellulose cartridges, NCP cartridges are resistant to bacterial attack allowing them to be used for municipal and nonchlorinated water applications.
  • Pleats provide additional surface area for high dirt-loading capacity, while maintaining minimal pressure drop. This combination of a pleated polyester media and carbon filtration produces an outstanding filter cartridge with extended service life.
  • NCP10 cartridges are excellent polishing filters, closed loop streams and are ideal for post reverse osmosis and well water applications.
  • NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
  • Pentek NCP-10 Carbon Filter Cartridge Specs:
  • Dimensions: 9-3/4" x 2-1/2" (248 mm x 64 mm)
  • Micron Rating (Nominal): 10 Micron
  • Temperature Rating:
    40°F to 125°F (4.4° C to 51.7°C)
  • Initial ∆P (psi) @ Flow Rate (gpm): 2 psi @ 3 gpm (0.1 bar @ 11 L/min)
  • Chlorine Taste & Odor Reduction @ Flow Rate (gpm):
    225 gallons @ 1 gpm
    (850 liters @ 3.8 L/min)
    NOTE: Filtration efficiency and chlorine taste and odor reduction efficiency are reduced at higher flow rates. Chlorine taste and odor reduction based on greater than 50% reduction using 2ppm free chlorine feed concentration at 68°F (20°C) at continuous flow.
  • Culligan NCP-10 Carbon Water Filter Materials of Construction:
  • Filter Media: Pleated Carbon-Impregnated Polyester
  • End Caps: Vinyl Plastisol
  • Netting: Polyethylene
  • Core: Polypropylene
  • Water Filter Housings for the NCP-10 water filters:
  • 155367 NCP-10 filter fits in housings for 10 inch water filters.
  • Fits Culligan / USFilter / Ametek / Pentek 10" Standard Whole House Water Filter System
  • Fits Culligan HF-360 Whole House Water Filter System