Unique design reduces carbon fines in filtered water
Ametek RFC-20 radial flow carbon cartridges are constructed with a 70-micron porous polyethylene outer shell and durable polypropylene end caps. The 2-3/4" OD cartridges have a
polypropylene core and the 4-1/2" OD cartridges incorporate a spun polypropylene core. Sandwiched between the outer shell and the core is a bed of granular
activated carbon (GAC).
The unique radial flow design offers the benefits of granular activated carbon (GAC) filtration, such as low pressure drop, while at the same time significantly
reducing the release of carbon fines commonly associated with GAC style cartridges.
Pentek RFC20 water filter cartridges are ideal point-of-entry (POE) and other high flow rate applications.
NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
NOTE: The granular activated carbon cartridges will contain a very small amount of carbon fines (very fine black powder). After installation, a new cartridge
should be flushed with sufficient water to remove all traces of the fines from your water system before using the water. Each time you use your filtered water
tap for drinking or cooking purposes it is recommended that you run (flush) the tap for at least 20 seconds prior to using water. This is particularly important if
the water tap has not been used daily.
Pentek RFC-20 Radial Flow Carbon Water Filter Cartridge Specs:
Dimensions: 20" x 2-3/4" (508 mm x 70 mm)
Micron Rating (Nominal): 7
Temperature Rating: 40°F to 125°F (4.4° C to 51.7°C)