Water Filters Home > Whole House Water Filters > CP-1 Water Filter

Pentek / Ametek / Culligan / Kleen Plus / Plymouth Products / Pentair / American Plumber / Bruner / US Filter
CP-1 Water Filter

• Pentek / Ametek CP-1 Water Filter:
• Nominal 1 micron Pentek CP-1 Pleated Cellulose Polyester Water Filter Cartridge
• Special formulation of resin-impregnated cellulose and polyester fibers
• Provides higher wet strength than regular cellulose cartridges
• The Ametek CP-1 water filters also provide high flow rates and dirtholding capacity, while maintaining extremely low pressure drop.
• Minimal unloading and media migration
• The US Filter CP-1 water filter cartridge media is pleated around a polypropylene core for added strength and the ends are immersed in a thermo-setting vinyl plastisol. Embedding and sealing each end of the pleat block in this fashion fuses the components together forming a unitized end cap and gasket.
• NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

• Pentek CP-1 Pleated Cellulose Water Filter Cartridge Specs:
• Dimensions: 9-3/4" x 2-5/8" (248 mm x 67 mm)
• Micron Rating (Nominal): 1 Micron
• Temperature Rating:
  40°F to 125°F (4.4°C to 51.7°C)
• Initial ∆P (psi) @ Flow Rate (gpm): <1 psi @ 10 gpm (<0.1 bar @ 38 L/min)

• Pentek CP-1 Sediment Filter Materials of Construction:
• Filter Media: Cellulose Polyester
• Core: Polypropylene
• End Caps: Vinyl Plastisol

• Water Filter Housings for the CP-1 water filters:
• 155181 Ametek CP1 filter fits in housings for 10 inch water filters.
• Fits Culligan / USFilter / Ametek / Pentek 10" Standard Whole House Water Filter System
• Fits Culligan HF-360 Whole House Water Filter System