Water Filters Home > Whole House Water Filters > ECP50-10 Water Filter

Pentek / Culligan / Ametek
ECP50-10 Water Filter

• Pentek / Ametek ECP50-10 Water Filter:
• Nominal 50 micron Pentek ECP50-10 Pleated Cellulose Polyester Water Filter Cartridge
• Special formulation of resin-impregnated cellulose and polyester fibers
• Provides higher wet strength than regular cellulose cartridges
• The Pentek ECP50-10 water filters also provide high flow rates and dirtholding capacity, while maintaining extremely low pressure drop.
• Minimal unloading and media migration
• The Pentek ECP50-10 water filter media is pleated around a polypropylene core for added strength and the ends are immersed in a thermo-setting vinyl plastisol. Embedding and sealing each end of the pleat block in this fashion fuses the components together forming a unitized end cap and gasket.
• The new ECP water filter cartridges contain more media surface area than most competitive cartridges. The standard 10" ECP cartridges contain six square feet of media, where most cartridges contain only 4.5 square feet.
• NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

• Pentek ECP50-10 Pleated Cellulose Water Filter Cartridge Specs:
• Dimensions: 9-3/4" x 2-5/8" (248 mm x 67 mm)
• Micron Rating (Nominal): 50 Micron
• Temperature Rating:
  40°F to 125°F (4.4°C to 51.7°C)
• Initial ∆P (psi) @ Flow Rate (gpm): <1 psi @ 10 gpm (<0.1 bar @ 38 L/min)

• Pentek ECP50-10 Sediment Filter Materials of Construction:
• Filter Media: Cellulose Polyester
• Core: Polypropylene
• End Caps: Vinyl Plastisol

• Water Filter Housings for the ECP50-10 water filters:
• 255484 Pentek ECP50-10 filter fits in housings for 10 inch water filters.
• Fits Culligan / USFilter / Ametek / Pentek 10" Standard Whole House Water Filter System
• Fits Culligan HF-360 Whole House Water Filter System