Reverse Osmosis Membrane Housing for Standard RO Membranes:
The RO Membrane Housing can be used with most 12" reverse osmosis membrane elements.
This reverse osmosis membrane housing has a thicker body for stronger durability and stronger membrane cup design to prevent cracking.
The RO membrane housing has standard 1/8” threaded ports.
This Reverse Osmosis Membrane housing utilizes a flat gasket and an o-ring to ensure a true double o-ring seal. Other RO membrane housings lacking one o-ring will leak.
You do not have to worry about bypass of Brine water to the Permeate side which is quite common on most other housings manufactured today.
The reverse osmosis membrane housing has been Tested and Certified by NSF International to NSF/ANSI Standard 42 for material and structural integrity requirements only.
Reverse Osmosis Membrane Housing Materials of Constructions:
HOUSING: POLYPROPYLENE
CAP: POLYPROPYLENE
O-RING: EPDM
MAXIMUM TEMPERATURE: 125°F (51.7°C)
MAXIMUM PRESSURE: 100 PSI (7 BAR)
Use the Reverse Osmosis Membrane Housing with:
Reverse Osmosis Systems using a 12" Reverse Osmosis Membrane. 12" RO Membranes are the standard size.
Help Me Order!
Contact Us M-F 9-5 CST
(612) 605-6910
(888) 801-PURE