SM-1 Inline TDS Meter Video Transcript

Hey everyone, Aquaman here with Today we’re looking at the HM Digital SM-1. The SM-1 is a very simple, basic single inline TDS meter. It has a single sensor so it’s only measuring one water source. This is perfect for those of you that have an extremely consistent incoming water supply. If you know the TDS of your incoming water, and it’s been that way for a very long time, then you may not need a dual sensor unit. So, simply get an SM-1 and then install the sensor after the filter system. All you need to do now is some math; calculate the percentage of reduction of your TDS and you’ll know if your system is operating at the proper efficiency. And that’s going to depend on your unique circumstances. Do you have an RO system? Do you have a deionization system? Depending on your system and your circumstances, you’ll know what your number needs to be. But you can’t know it unless you have a TDS meter of some kind. This is nice because it’s built in and it’s ready to go. Simply walk up to it, press the button, get a reading on the LCD screen, do a little math and you’re on your way to knowing if your system is working right or not. A real basic, real simple system; probably for residential applications, but with care it could be used in a commercial setting, light duty. Again, this is the SM-1 from HM Digital, and I’m your host Aquaman with Thanks for watching. 

See detailed specifications and purchase the SM-1 Inline TDS Meter here.