WaterSentinel WSL-1 Refrigerator Filter (LG LT500P Compatible)

• WaterSentinel WSL-1 Refrigerator Water Filter:
• The Water Sentinel WSL-1 Refrigerator Filter delivers clean, clear water that looks and tastes great.
• The WaterSentinel WSL1 replacement filter will reduce chlorine taste and odor in your drinking water.
• The WSL-1 water filter includes an NSF certified 6 gram package of o-ring lubricant known as DOW 111. This silicone lubricant works to ensure that the unit you install goes in properly and also is easy to remove after use.
• The materials used for the Water Sentinel WSL-1 are of the highest quality.
• The internal filtration element used in the WSL-1 refrigerator filter is one that is designed to provide the longest life as well as the highest amount of simple dirt holding capacity available.
• The WaterSentinel WSL-1 filter is an economical replacement filter for the LG LT500P refrigerator water filters.
• The Water Sentinel WSL-1 water filter should not be used with water that is microbiologically unsafe or of unknown quality, without adequate disinfection before and/ or after the filter.
• Made in USA

Contaminant Removal:

• Chlorine
• Bad Taste and Odor
• Sediment

Filter Type: Activated Carbon Block

Filter Life: 6 months or 300 gallons

Flow Rate: 0.5 gallons per minute

Size: 5 1/2 inches (length) x 3 1/2 inches (diameter)

UPC: 718122037476

Country of Origin: U.S.A.

• Manufacturer: Water Sentinel WSL-1

• Water Sentinel WSL-1 Refrigerator Filters can be used in place of the following filters:
• LG LT500P Filter
• 5231JA2002A Filter
• 5231JA2002A-S Filter
• EFF-6005A Filter

• Compatible Replacements for the WSL-1 Water Filter:
• The Swift Green SGF-LA22 Water Filter is compatible with the WSL-1 Water Filter, and is the environmentally friendly choice.

Installation Instructions:

1. Twist the old filter a quarter-turn counterclockwise
2. Pull the filter straight down and discard (don't worry, the water will shut off automatically)
3. Push the new filter up into the fridge until it stops
4. Twist the filter a quarter-turn clockwise
5. Reset your 'change filter' light (if your fridge has one)

Resetting your 'change filter' indicator:

1. Press and hold the reset button for 3 seconds