Waterpik Instapure F-8 Faucet Mount Water Filter System

• Instapure Waterpik F-8 Faucet Mount Water Filter System:
• The Instapure F-8 faucet system reduces bad taste and odor including chlorine taste and odor.
• The F-8 water filter reduces 53 contaminants
• The F-8 system's compact design easily installs on most kitchen faucets. No tools necessary for installation.
• Auto-switch extends filter life by automatically switching back to unfiltered water after each use.
• Convenient Filter Change Indicator Light tells you when to change your filter
• The Instapure F-8 faucet filter system has a power rinse feature that uses unfiltered water jet to rinse your pots and dishes.
• The Waterpik Instapure F-8 water filter system is tested and certified by NSF International against ANSI/NSF Standard 42 for the reduction of Chlorine (Class II), Taste and Odor.
• This F-8 WaterPik End of Faucet Water Filter System meets NSF / ANSI Standard 53 for the reduction of Cysts, Lead, and more than 30 other contaminants.
• The Waterpik F-8 faucet filter system has a white base with a white filter unit and a more contemporary design.
• Filter cartridge included.

• Instapure Waterpik F-8 Faucet Mount Water Filter System Contaminant Reduction:
• This F-8 WaterPik Instapure Faucet Water Filter System meets NSF / ANSI standard 53 for the reduction of:
• 99.5% of Alachlor
• 99% of Asbestos
• 95% of Atrazine
• 96.4% of Benzene
• 98.7% of Carbofuran
• 85.6% of Carbon Tetrachloride
• 99.4% of Chlordane
• 99.99% of Cysts - Cryptosporidium and Giardia Cysts
• 98.0% of 0-Dichlorobenzene
• 96.9% of Endrin
• 99.0% of Ethylbenzene
• 99.5% of Heptachlor Epoxide
• 99% + of Lead
• 98.7% of Lindane
• 87.7% of Mecury at PH of 6.5
• 96.6% of Mecury at PH of 8.5
• 98.3% of Methoxychlor
• 99.9% of Monochlorobenzene
• 77.1% of MTBE
• 98.3% of Simazine
• 99.9% of Styrene
• 96.4% of Tetrachloroethylene
• 97.7% of Toluene
• 93.2% of toxaphene
• 99.8% of Trichloroethylene
• 99.3% of TTHM's
• 97.7% of Turbidity
• 99.3% of 2, 4-D
• 99.7% of 2, 4-5-TP (Silvex)

Filter Type: Activated Carbon Block

Flow Rate: 0.65 gallons per minute

Size: 6 inches (length) x 2 inches (height) x 4 1/2 inches (width)

UPC: 891465002094

Country of Origin: China

• Manufacturer: Instapure F8WU-1ES

• Replacement Filter for the Waterpik Instapure F-8 End of Faucet System:
• The Instapure Teledyne Waterpik R-8 replacement filter cartridge can be purchased here.
• The Waterpik Instapure R-8 replacement filter lasts 2 months or 100 gallons. The water filter cartridge life depends on the quality of your water and the amount of water used.

• Instapure F-8 Faucet Mount System Instructions:
• Instapure F-8 Brochure
  (Download Adobe Reader)