Waterpik Instapure R-7 Replacement Faucet Filter

• Waterpik R-7 Replacement Faucet Filter:
• Replacement faucet water filter cartridge for the Teledyne Waterpik F-7 (F7) Faucet Mount Water Filter System
• Replacement faucet water filter cartridge for the Teledyne Waterpik F-7WS (F7WS) Faucet Mount Water Filter System
• Reduces the following contaminants: Asbestos, Chlorine Taste & Odor, Cysts, Lead, Lindane, and sediment
• Produces healthier, better-tasting drinking water
• 99% reduction in lead and asbestos
• Reduces greater than 99.95% of Cysts

Contaminant Removal:

• Chlorine
• Bad Taste and Odor
• Lead
• Asbestos
• Lindane
• 99.99% of Cysts

Filter Type: Activated Carbon Block

Filter Life: 3 months or 200 gallons

Micron Rating: 3 microns

Flow Rate: 0.5 gallons per minute

Size: 3 inches (height) x 2 inches (diameter)

UPC: 891465002162

Country of Origin: China

• Manufacturer: Instapure F7R-1ES

• Waterpik R-7 Faucet Filter Replacement:
• Quick and easy replacement of the Teledyne Instapure Waterpik R7 faucet water filter cartridge
• Waterpik R-7 faucet water filter cartridge life up to 3 months or 200 gallons. The water filter life also depends on the quality of your water.

Installation Instructions:

1. Unscrew the filter cover and set aside
2. Grasp the used filter on one hand and the filter unit in the other hand
3. Lift the used filter straight up and discard
4. Remove the red plug (if present) from the bottom of the new filter
5. Align the holes in the new filter with the white discs in the filter unit
6. Press the filter straight down
7. Screw the cover back into place
8. Flush the new filter for 2 minutes (and for a few seconds before each use)