Whole House Systems
  • Drinking Water Systems
  • Replacement Filters
  • verified_user Warranty Info
    Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
    Tier1

    TIER1-P5-10

    10 X 2.5 Inch 5 micron Polypropylene Replacement Filter by Tier1

    Fits into most industry standard 10-inch water filtration system housings
    • Goes work immediately and lasts for up to 6 months

    • Reduces many common contaminants from your water

    • Polypropylene construction inhibits the growth of bacteria

    • Supports a flow rate of up to 5 gallons per minute (gpm)

    format_list_bulleted Features & Specs
    Package Qty: 1
    Manufacturer: Tier1
    Manufacturer's Id: P5-10
    UPC: 799932624926
    Actual Size (in): 9 7/8 inches (length) x 2 7/16 inches (outside diameter)
    Primary Filter Media: Polypropylene
    Operating Temperature (°F): 40 - 145
    Operating Temperature (°C): 4.4 - 62.8
    Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
    Brand: Tier1
    Advertised Size: 10 x 2-1/2
    Depth (in): 2.44 in
    Length (in): 9.88 in
    Outside Diameter (in): 2.44 in
    Width (cm): 6.19 in
    Width (in): 2.44 in
    Media Type: Sediment Filter
    UPC's For Search: 799932624926 | 10051678357436 | 051678357439
    Micron Rating Nominal: 5
    Netsuite Item Type: Whole House Cartridges
    description Instructions
    1. Turn off water supply. Press red pressure-relief button (if present)
    2. Unscrew housing. Remove large o-ring, wipe clean and set aside
    3. Discard used filter cartridge
    4. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
    5. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
    6. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
    7. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
    8. Insert new filter cartridge
    9. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
    10. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation
    warning_amber Contaminants Reduced
  • Dirt Sand Sediment
  • Rust And Corrosion
  • Sand
  • Sediment
  • Silt
  • filter_alt Filter Life
    Filter Life (gallons): 6 months
    verified_user Warranty Info
    Warranty Guarantee: Unconditional Product Guarantee for Life of the Product

    TIER1-P5-10 Filter Advanatges

    The Pentek P5 comparable whole house sediment water filter by Tier1 works hard providing you with cleaner, fresher great-tasting water. The P5-10 by Tier reduces contaminants down to 5 microns for up to six months. Affordably priced and using standardized sizing this filter is an excellent replacement filter for your whole house system housing. Enjoy the benefits of filtered water and order your replacement polypropylene sediment filter today!

    Polypropylene Sediment Filter

    Polypropylene-constructed filters inhibit bacterial growth making them an ideal option for both municipal and well water applications. These filters are effective at capturing contaminants such as sand, sediment, silt, and more. Unlike carbon filter cartridges you won't have to worry about small carbon fines potentially spilling into your water, while still enjoying the benefits of filtered water throughout your home. Polypropylene filters are great for whole house water filtration and can be used as effective pre-filters for whole house or point-of-use systems.

    Universal Filter Sizing

    The 10 X 2.5 polypropylene replacement filter by Tier1 is built to fit 10-inch x 2.5-inch filter housings. This standard sizing allows this filter to easily replace existing styles of whole house filters for housings requiring 10 x 2.5-inch filters. The P5-10 goes to work immediately providing cleaner, fresher water for up to six months. Enjoy cleaner better water with your whole house replacement filter today.


    TIER1-P5-10   is comparable with the following part number(s)

    • 9547
    • 9577
    • 9591
    • 9747
    • 12461
    • 13110
    • 17367
    • 45331
    • 57820
    • 173884
    • 1019128
    • 1227867
    • 155014-131
    • 155014-43
    • 155014-52
    • 529-286
    • 55410-14
    • 55410-15
    • 55410-16
    • Ace 45331
    • American Plumber 155014
    • American Plumber W5P
    • Ametek 583228
    • Ametek P5
    • AP110
    • Flotec RS3
    • FXUSC
    • FXWPC
    • FXWSC
    • FXWTC
    • GE FXUSC
    • GE FXWPC
    • GE FXWSC
    • GE FXWTC
    • GE GXWH01C
    • GE GXWH04F
    • GE GXWH08C
    • GE GXWH20F
    • GXWH01C
    • GXWH04F
    • GXWH08C
    • GXWH20F
    • HF-150
    • HF-160
    • HF-360
    • Honeywell RF-60
    • K00173
    • Kenmore 38480
    • Kleen Plus P5
    • Master Plumber 583328
    • P5
    • P5-D
    • Pentek P5
    • PS220410
    • Sears 34362
    • TIER1-P5-10
    • True Value 529-286
    • US Filter P5
    • W25P
    • W34-PR
    • W5P
    • W5P
    • W5P478
    • WaterPik IR-20
    • WC34-PR
    • WHCF-DWHV
    • WHCF-GD05
    • Whirlpool WHKF-GD05
    • WHKF-DWHV
    • WHKF-GD05
    • WVC34
    • AP3416588
    • P5-10
    • TIER1-P5-10

    TIER1-P5-10   fits the following model number(s)

    • 3G-STANDARD-34-PR10
    • 150574
    • All 10 x 2.5 inch filter housings
    {"statementLink":"","footerHtml":"","hideMobile":false,"hideTrigger":false,"disableBgProcess":false,"language":"en","position":"left","leadColor":"#146ff8","triggerColor":"#146ff8","triggerRadius":"50%","triggerPositionX":"left","triggerPositionY":"bottom","triggerIcon":"people","triggerSize":"medium","triggerOffsetX":20,"triggerOffsetY":20,"mobile":{"triggerSize":"small","triggerPositionX":"left","triggerPositionY":"bottom","triggerOffsetX":10,"triggerOffsetY":10,"triggerRadius":"50%"}}