Water Filters Home > Undersink Water Filters > Culligan 301 Replacement Filter

Culligan System 301
Replacement Water Filter

• Culligan 301 Water Filter Purpose:
• Using advanced technology, the Culligan System 301 activated carbon block filter effectively reduces the presence of four classes of chemicals, some of which are regulated by the EPA as potentially carcinogenic. Note: your water may not contain organic chemicals.
• Unpleasant and potentially-harmful organic chemicals can now be significantly and economically reduced in your water with the Culligan System 301 Drinking Water Filter.
• Reduces chlorine taste and odor and sediment from your drinking water
• The Culligan System 301 Drinking Water Filter has been tested and certified to ANSI/NSF International Standard 53 for VOC reduction and to ANSI/NSF International Standard 42 for Chlorine, Taste and Odor reduction.

• Culligan 301 Filter Information:
• Easy to install in Culligan System 301 under sink water filter systems
• Change both filter cartridges at least every 500 gallons or every 6 months: whichever occurs first, or whenever you detect a change in taste, odor, or decrease in water flow. Use only a genuine Culligan replacement cartridge to keep your system operating as it was designed.
• Operating pressure range: 5-120 psig (30-830 kPA)
• Do not allow exposure to temperatures below 33°F. (1°C)
• Maximum operating temperature: 100°F. (38°C)
• Rated Service Flow Rate: 0.5 gpm (1.9 L/min)
• Caution - Do not use where water is microbiologically unsafe or with water of unknown quality.

• Culligan 301 Replacement Information:
• Replacement Culligan 301 Filter for the Culligan System 301
• Replacment Cartridge: 01-0024-64
• This system requires regular replacement of the filter cartridge to maintain proper operation. Varying chlorine, sediment, or organic substance level may affect replacement frequency.
• Change both filter cartridges at least every 500 gallons or every 6 months: whichever occurs first, or whenever you detect a change in taste, odor, or decrease in water flow. Use only a genuine Culligan 301 replacement cartridge to keep your system operating as it was designed.
• Replacing the filter cartridge:
  1. Turn off the water supply to the filter.
  2. Open the filter faucet.
  3. Remove the U-clip and top cap of the filter housing.
  4. Remove and discard the used filter cartridge.
  5. Install new filter cartridge and reassemble the system.
  6. Turn on the water supply and flush the filter.

• Aqua-Cleer VOC Replacement Information:
• The 301 filter can also be used in the Aqua-Cleer VOC Filter.
• When used in the Aqua-Cleer VOC Filter, this cartridge must be replaced every 250 gallons or 4 months of use, whichever comes first.

Culligan System 301 Undersink Replacement Water Filter: