Water Filters Home > Whole House Water Filters > DGD-5005-20 Water Filter

Ametek / Culligan / Pentek
DGD-5005-20 Sediment
Water Filter

• DGD-5005-20 Sediment Water Filter:
• Two separate gradient density layers enhance cartridge performance
• There is a 50 micron pre-filter sediment water filter layer and a 5 micron post-filter medium-fine sediment water filter layer
• The larger diameter of the pre-filter reduces the particle load to the post filter, allowing it to operate at higher velocities.
• The Pentek DGD-5005-20 water filters reduce dirt, sand, sediment, silt, rust particles, and scale particles
• Resistant to chemicals and corrosion
• Manufactured from 100% pure polypropylene
• Designed for purity, bacteria resistance, and chemical resistance
• The DGD-5005-20 water filter cartridge will not add taste, odor, or color to the liquid being filtered
• Three times the dirt-holding capacity of similar sized sediment water filter cartridges
• Ideal for all residential, rural, commercial, industrial, and municipal applications
• Fits in big blue whole house water filter systems and commercial water treatment systems
• 20 inch x 4.5 inch Sediment Water Filter

• DGD-5005-20 Water Filter Replacement Information:
• Easy to install in whole house systems or commercial water filter systems
• Replace the sediment water filter cartridge every 2 months or 8,000 gallons of water
• Type: Dual Gradient Density
• Filter Media: Polypropylene
• Temperature: 40ºF to 145ºF (4.4ºC to 62.8ºC)
• Dimensions: 20" x 4 1/2" (508 mm x 114 mm)

• DGD-5005-20 Water Filter Housings:
• For use in Ametek, US Filter, Culligan 20" Big Blue housings
• The following Culligan, Ametek, USFilter, and Plymouth Products model holds the DGD-5005-20 sediment water filter cartridge:  #20 Big Blue
• The Pentek DGD-5005-20 Sediment Water Filter Cartridge also fits Cuno AquaPure, Omni, Sears, Fulflo, Teledyne Water Pik, Ace, Master Plumber, Flotec, Honeywell, General Electric, American Plumber, and most other water filter housings for 20" x 4.5" filters