Water Filters Home > Whole House Water Filters > S1-20 Water Filter

Pentek / Culligan / Ametek
S1-20 Sediment Water Filter

• Pentek S1-20 Sediment Water Filter:
• 20 micron medium sediment water filter
• The Pentek S1-20 water filters reduce sand, sediment, silt, rust particles, and scale particles
• Pleated walls for dirt-holding capacity
• Recommended for chlorinated water supplies
• The media is pleated around a polypropylene core for added strength and the ends are immersed in a thermo-setting vinyl plastisol.
• An external netted sheath helps retain uniform pleat spacing in high flow and pulsating flow streams.
• The S1-20 water filter cartridge fits in whole house water filter systems and commercial systems

• S1-20 Water Filter Replacement Information:
• Easy to install in whole house water filter systems for home water treatment
• Replace the sediment water filters every 4 months or 16,000 gallons of water

• Pentek S1-20 Pleated Water Filter Cartridge Specs:
• Dimensions: 20" x 2-5/8" (508 mm x 67 mm)
• Micron Rating (Nominal): 20 Micron
• Temperature Rating:
  40°F to 145°F (4.4°C to 62.8°C)
• Initial ∆P (psi) @ Flow Rate (gpm): 0.8 psi @ 10 gpm (0.06 bar @ 38 L/min)

• Pentek S1-20 Sediment Filter Materials of Construction:
• Filter Media: Resin-Impregnated Cellulose
• End Caps: Vinyl Plastisol
• Core: Polypropylene
• Netting: Polyethylene

• S1-20 Water Filter Equivalent Brands:
• The following Culligan, Ametek, USFilter, and Plymouth Products models hold the Pentek S1-20 sediment water filter cartridge:  #20 Blue
• The Pentek S1-20 Sediment Water Filter also fits Cuno, AquaPure, Omni, Sears, Fulflo, Teledyne Water Pik, Ace, Master Plumber, Flotec, Honeywell, General Electric, American Plumber, and most other water filter housings for 20" x 2.5" filters