Filtrete OAC50 Office Air Purifier

The FILTRETE-OAC50 Help remove particles from the air in small or large office areas. Office Air Cleaners work together with Filtrete Filters to capture microscopic allergens like dust, smoke and smog particles, as well as large allergens like mold spores and pet dander from the air passing through the filter. Enhance your workplace with cleaner, healthier air with a Filtrete office air purifier.

The Filtrete Office Air Purifier

• Perfect for rooms up to 8 x 10 (80 square feet) in size
• Dual layered Air Cleaning Filter with Activated carbon captures airborne particles and reduces odors
• Ionizer imparts charge to filtered air to enhance particle filtration
• Filtered air is released from the unit with your choice of 3 different fan speeds to help increase circulation

Contaminant Removal:

• Dust
• Smoke
• Smog particles
• Mold spores
• Pet dander

Filter Type: Carbon-Impregnated Fabric

Size: 12 1/4 inches (length) x 5 inches (height) x 12 inches (width)

UPC: 051131946750

Country of Origin: Taiwan

The OAC50 is also known by the following part numbers:

• OAC50

Installation Instructions:

1. Turn the Air Cleaner OFF and unplug the unit from the power outlet
2. Carefully set unit down on a flat surface with the front grille facing you
3. Using finger pressure, press the bottom center of the grille where the embossed text reads 'PRESS'. Then lift the front edge of the grille up to remove it
4. Remove and discard the old filter
5. Remove any protective plastic wrapping and packaging from the new filter
6. Place new filter into the Air Cleaner with the arrow on the filter frame pointing in the direction of the air flow. The white side of filter should be viewable before closing grille
7. Reattach the front grille by placing the top edge of the grille near the top of the Air Cleaner, lining up the grille tabs with the Air Cleaner slots
8. Snap front grille into place by pushing down carefully near the bottom edges of the front grille"

Resetting your 'change filter' indicator:

1. Adjust the Filter Change dial to indicate the month the filter has been changed