Frigidaire ULTRAWF PureSource Ultra Refrigerator Water Filters

• Frigidaire ULTRAWF PureSource Ultra Refrigerator Water Filter Cartridge and Replacement Filters:
• The Frigidaire Puresource Ultra Filter ULTRAWF is a genuine Frigidaire replacement water filter that fits Frigidaire Pure Source Ultra refrigerators which feature a cylindrical filter housing mounted on the refrigerator's ceiling.
• The Frigidaire ULTRAWF filter will also replace part numbers 242017800 and A0094E28261.

• Frigidaire ULTRAWF PureSource Filter Contaminant Removal :
• Chlorine
• Particulates (Class 1)
• Lead
• Cysts
• Turbidity
• Atrazine
• 2,4-D
• Endrin
• Toxaphene
• Mercury
• Lindane
• Alachlor
• Benzene
• P-Dichlorobenzene
• O-Dichlorobenzene
• Ethylbenzene
• Chlorobenzene
• Monochlorobenzene
• Styrene
• Tetrachloroethylene
• TTHM
• Carbofuran
• Asbestos
• 2,4,5-TP
• 1,2,4 Trichlorobenzene

Note: The Frigidaire Puresource Filter (ULTRAWF) conforms to NSF / ANSI Standard 53 for VOC reduction, with a VOC surrogate average reduction of 99.8 percent.

• Frigidaire Pure Source Ultra Filter Specifications:
• Pressure Range: 30 - 100
• Temp. Range: 33 - 100 F
• Flow Rate: 0.5 gallons per minute
• Capacity (Filter Life): 6 months or 200 gallons

Note: This genuine Frigidaire refrigerator filter has been tested and certified to NSF / ANSI Standards 42 and 53 in Frigidaire Pure Source Ultra refrigerators for the reduction of the claims specified.

• Manufacturer: Frigidaire ULTRAWF

The ULTRAWF is also known by the following part numbers:

• ULTRAWF, 242017800, 242017801, A0094E28261, PS2364646, ULTRA-WF

• Frigidaire PureSource ULTRAWF Instructions :
• The PureSource Ultra Refrigerator Ice and Water Filter Cartridge ULTRAWF should be replaced approximately every 6 months or when the "change filter" light comes on, whichever comes first.

• Installing Your Water Filter:
• Turn off the icemaker (using the power switch).
• Push the end of the old filter straight in until it clicks (and releases).
• Slide the old filter straight out and discard ( the water will shut off automatically).
• Push the new filter straight in until it clicks (and snaps into place).
• Turn the ice maker back on.
• Flush the system by running the dispenser for approximately 3 minutes.
• Reset your "change filter" light.

• Resetting your "change filter" light:
• Press and hold the Filter Status button on the dispenser for 3 seconds, until the display changes from "Replace" to "Good".