Whole House Systems
  • Drinking Water Systems
  • Replacement Filters
  • verified_user Warranty Info
    Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
    Tier1

    TIER1-FX30-934-2PK

    10 X 2.5 Spun Wound Polypropylene Replacement Filter Set by Tier1 (30 micron)

    • Bonded Polypropylene filter media

    • Convenient 2-Pack offering

    • Fits many common 10 inch by 2.5 inch housings

    • Brings you cleaner water along with an easy installation

    format_list_bulleted Features & Specs
    Package Qty: 2
    Manufacturer: Tier1
    Manufacturer's Id: FX30-934
    UPC: 700355940715
    Actual Size (in): 9-3/4 inches (length) x 2-1/2 inches (outside diameter)
    Media: Spun Wound Polypropylene
    Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
    Brand: Tier1
    Advertised Size: 10 x 2-1/2
    Depth (in): 5 in
    Length (in): 9.78 in
    Outside Diameter (in): 2.5 in
    Width (in): 5 in
    Media Type: Sediment Filter
    UPC's For Search: 700355940715 | 10084691794841 | 84691794844
    Micron Rating Nominal: 30
    Netsuite Item Type: Whole House Cartridges
    description Instructions
    1. Turn off water supply. Press red pressure-relief button (if present)
    2. Unscrew housing. Remove large o-ring, wipe clean and set aside
    3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
    4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
    5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
    6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
    7. Insert new filter cartridge
    8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
    9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation
    warning_amber Contaminants
  • Dirt Sand Sediment
  • Hard Scale
  • Limescale
  • Oxidized Iron
  • Particles
  • Sand
  • Sand Fine
  • Silt
  • filter_alt Filter Life
    Filter Life (gallons): 6 months
    verified_user Warranty Info
    Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
    warning

    WARNING: Prop65 warning applies to products that contain carbon media. Click here for more details

    WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov


    The GE FXUSC comparable water filter by Tier1 is a 10 x 2.5 inch whole house sediment water filter for well water or reverse osmosis filtration system applications that require reduction of sediment, dirt, rust and corrosion. Bonded Polypropylene filter media headlines this economical 2-pack of 30 micron sediment filters that will meet your filtering challenges head on. Order today!


    TIER1-FX30-934-2PK   is comparable with the following part number(s)

    • AP3416588
    • FXUSC
    • FXWPC
    • FXWSC
    • FXWTC
    • GE FNUS
    • GE FXUS
    • GE FXUSB
    • GE FXUSC
    • GE FXWPC
    • GE RXWSC
    • GXWH01C
    • GXWH04F
    • GXWH08C
    • GXWH20F
    • PS220410
    • RB-AP-110
    {"statementLink":"","footerHtml":"","hideMobile":false,"hideTrigger":false,"disableBgProcess":false,"language":"en","position":"left","leadColor":"#146ff8","triggerColor":"#146ff8","triggerRadius":"50%","triggerPositionX":"left","triggerPositionY":"bottom","triggerIcon":"people","triggerSize":"medium","triggerOffsetX":20,"triggerOffsetY":20,"mobile":{"triggerSize":"small","triggerPositionX":"left","triggerPositionY":"bottom","triggerOffsetX":10,"triggerOffsetY":10,"triggerRadius":"50%"}}