GE MWF Refrigerator Water Filter

The GE SmartWater Refrigerator Water Filter fits GE and Hotpoint refrigerators with a round white plastic filter mounted inside the refrigerator compartment above the top shelf. The filter uses Activated Carbon Block to remove contaminants for up to 6 months.

• Made in U.S.A.

Contaminant Removal:

• 96.00% of Chlorine
• 99.10% of Particulates (Class I)
• 99.00% of Lead
• 93.00% of Mercury
• 99.00% of Asbestos
• 96.00% of Benzene
• 99.00% of P-Dichlorobenzene
• 99.99% of Cysts
• 94.00% of Atrazine
• 99.00% of Alachlor
• 98.00% of Carbofuran
• 99.00% of Lindane
• 93.00% of Toxaphene
• 98.00% of 2,4-D
• 98.00% of Turbidity

Filter Type: Activated Carbon Block

Filter Life: 6 months or 300 gallons

Micron Rating: 0.5 microns

Flow Rate: 0.5 gallons per minute

Size: 5 1/4 inches (length) x 3 1/2 inches (diameter)

UPC: 084691125013

Country of Origin: U.S.A.

The MWF is also known by the following part numbers:

• MWF, WF287, 101057-A, 101057A, 101300-0110, 101300-A, 101300A, 197D6321P001, 46-9991, 46-9996, 469991, 469996, 9991, 9996, AP3859302, AP3967843, GWF01, GWF06, GWFA, GWFDS, HWF, HWFA, MWF3PK, MWFA, MWFAP, MWFDS, PC40677, PC61278A, PS981638, PS983115, PT11577906, WF-287, WR02X11020, WR02X11287, WR02X11290, WR17S12, WR2M3552

Installation Instructions:

1. Twist the old filter a half-turn counterclockwise
2. Pull the filter straight down and discard (don't worry, the water will shut off automatically)
3. Fill the new filter with water (you can use the cold water faucet on your kitchen sink)
4. Push the new filter up into the fridge until it stops
5. Twist the filter a half-turn clockwise
6. Reset your 'change filter' light (if your fridge has one)

Resetting your 'change filter' indicator:

1. Press and hold the reset water filter button on the dispenser for 3 seconds