select Compare (0)
Compare Products

You have no items to compare.

HM Digital PS-200 Dual Inline TDS Controller for Commercial Systems

More Views

HM Digital PS-200 Dual Inline TDS Controller for Commercial Systems

0 0
The Inline PS200 Dual Controller monitors and controls TDS levels of two water lines for high output commercial systems. The Dual Controller has large, bright LED display. An alarm will sound if the total dissolved solids level rises above the user-set level for the output water. The Controller installs easily in minutes. The Controller includes two sensor probes (at no extra cost). The PS-200 is a monitor for Line 1 (inline) and a controller for Line 2 (out-line). A protective cover, CC-1, is also available.
  • Setting: Controlled by on-screen up and down buttons, 2 Probes: 0.5-inch bushing, 9.8 ft (3 meter) shielded cable, Resolution: 1 PPM
  • Display: Bright 5/8-inch LED display, Accuracy: +/-2%, Alarm: Optional steady beep for out line/Line 2 (set by user)
  • Relay Control: The unit will open or close a circuit via dry contacts when the ppm level (out line/line 2 only) reaches or exceeds the control setting (simple switch)
  • It can be used to control a pump, solenoid valve or other device (In line/Line 1 does not have a control function)
  • Genuine OEM Product
Used In Brands HM Digital
Manufacturer's Id PS-200
UPC 799705707160
Actual Size (in) 2 4/5 inches (height) x 2 4/5 inches (width) x 4 inches (depth)
Actual Size (cm) 7.112 x 7.112 x 10.16
Operating Temperature (°F) 32 - 176
Operating Temperature (°C) 0 - 80
Warranty Guarantee 1-Year Limited Warranty
Includes TDS Controller System, Two Sensor Probes
Additional Information ATC: Yes (1 - 65 degrees Celsius), Calibration: Adjustable, Conversion Factor: NaCl (avg. 0.5), Relay Voltage: 5V (simple switch), Monitor Weight: 1 lbs 0.8 oz, Power supply: AC 110V / AC 220V, Range: 0 - 999ppm

The PS-200 is also known by the following part numbers:

  • HMPS-200, PS-200, PS200