Whole House Systems
Drinking Water Systems
Replacement Filters
HYDRONIX-SDC-45-2010
Hydronix SDC-45-2010 Sediment Polypropylene Water Filter Cartridges
The Hydronix SDC-45-2010 is tested and certified by NSF International to ANSI/NSF Standard 42 for material requirements only.
The Hydronix SDC-45-2010 depth filter removes sediment, dirt, sand, and silt for cleaner, filtered water.
The Hydronix SDC-45-2010 filter should be replaced approximately every 3 months depending on your water quality and usage.
format_list_bulleted Features & Specs
description Instructions
- Each time you replace your filter, clean and inspect the o-ring in between the housing cap and sump
- If there is any damage to the o-ring replace it
- After cleaning the o-ring apply a silicone lubricant, like OR-LUBRICANT-SM (purchasable separately)
- You must use a silicone food grade lubricant--all other types of lubricant could damage the o-ring
- Silicone lubricant prevents leaking and extends the life of the o-ring
workspace_premium Certification
warning_amber Contaminants
filter_alt Filter Life
warning WARNING: Prop65 warning applies to products that contain carbon media. Click here for more details
WARNING: Prop65 warning applies to products that contain carbon media. Click here for more details
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
The Hydronix SDC-45-2010 Sediment Depth Cartridge is a 10 micron sediment filter. The Hydronix SDC-45-2010 Sediment Water Filter measures 20-inch x 4-1/2-inch. The Hydronix SDC-45-2010 Polypropylene Prefilter has graded density for higher dirt-holding capacity. Hydronix Water Technology SDC-45-2010 water filter cartridges are made of 100% pure polypropylene. Hydronix SDC Sediment Depth Cartridges are perfect prefilters for GAC filters, RO systems, DI Systems, ice machines, wineries, and many more.