X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

Rusco 1-1/2-140CR-F Chemical Resistant Polyester Spin-Down Filter System

SKU
RUSCO-1-12-140CR-F
Price $117.99 List Price Price $122.99 Save 4%
Availability: Discontinued - Free Shipping
Choose a quantity
  • 1filter$117.99 
  • 3filters$114.49each
  • 6filters$110.89each
The Rusco clear cover is made of high impact polymer resin for maximum strength and durability. The top of the Rusco system is made of PVC. The Rusco sediment filter uses centrifugal separation technology to filter sediment from water. The Rusco filtration system has a polyester screen filter. The Rusco filter system's filter screen is cleanable and reusable. The Rusco systems have a clear cover that can easily be removed for cleaning. No tools are required to remove the cover. Sediment is visible through the clear cover indicating when the filter needs to be flushed. Rusco Sediment Filters have an open ball valve to easily flush sediment. When the Rusco filter is full of sediment, simply open the ball valve to flush the sediment. This Rusco System is made of molded non-corrosive materials and a Chemically Resistant Cover. Temperature rating up to 100 deg F (37.7 deg C).
More Information
Package Qty 1
Media Polyester Screen
Primary Filter Media Polyester
Flow Rate (gpm) Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x 25
Flow Rate (lpm) 94.64
Fitting Size (inches) 1-1/2 inches

Reduced Contaminants

The RUSCO-1-12-140CR-F reduces the following contaminants:

  • Coarse Sand
  • Extra Fine Sand
  • Fine Sand
  • Hard Scale
  • Sediment

Instructions

  1. Install the filter in a location that protects it from damage such as impact, freeze, excessive heat, chemical contact and water hammer. Install the filter in the preferred vertical position with the purge outlet pointing down
  2. Install the filter on the discharge side of the pump to allow the filter to be cleaned by purging through the flush valve
  3. Refer to arrows on the filter body for correct water flow direction. Adhere to all local and state codes, laws and regulations
  4. Adhere to all local and state codes, laws and regulations. Use approved solvent cement for gluing PVC connections
  5. Follow gluing instructions on glue container. It is recommended that the CLEAR COVER BE REMOVED FROM THE PVC BODY PRIOR TO THE GLUING PROCESS. Any excess glue that comes in contact with the clear cover will damage it
  6. The Rusco filter screens should be cleaned every few months. No tools are required for cleaning. The filter screen should be replaced every 6-12 months depending on your water usage and water quality
  7. The primary method of cleaning the Rusco filter is purging separated solids through the flush valve while the filter is under system pressure
  8. The purging process can be done manually with the flush valve or automated with our optional Automatic Flush Valve
  9. The filter element may need to be removed and cleaned. To remove the filter element, turn off the water supply, drain water pressure, unscrew the clear cover and remove the filter element
  10. Wash off collected sediment by spraying with water. Remove fine particles wedged in the screen with a soft brush. Apply silicone grease to o-rings if needed and reassemble. HAND TIGHTEN ONLY