Whirlpool 4396701 Refrigerator Water Filter

The Whirlpool Refrigerator Water Filter fits Whirlpool, KitchenAid, Jenn-Air, and Kenmore Top and Bottom Freezer refrigerators with a quarter-turn filter located in the grille at the bottom of the fridge. The filter uses Activated Carbon Block to remove contaminants for up to 6 months.

Contaminant Removal:

• 75.0% of Chlorine
• 99.0% of Particulates (Class III)
• 99.35% of Lead at pH 6.5
• 99.31% of Lead at pH 8.5
• 96.70% of Mercury at pH 6.5
• 91.20% of Mercury at pH 8.5
• 99.93% of Asbestos
• 96.30% of Benzene
• 99.70% of P-Dichlorobenzene
• 99.99% of Cysts
• 85.60% of Atrazine
• 92.96% of Toxaphene
• 93.06% of 2,4-D
• 99.30% of Turbidity

Filter Type: Activated Carbon Block

Filter Life: 6 months or 200 gallons

Flow Rate: 0.5 gallons per minute

Size: 9 1/2 inches (length) x 1 5/8 inches (diameter)

UPC: 050946958385

Country of Origin: Mexico

The 4396701 is also known by the following part numbers:

• 4396701, 046-9915, 04609915000, 0469915, 09915, 09915P, 2301706, 4396703, 4396706, 46-9915, 4609915000, 469915, 6701, 9915, 9915P, FILTER6, L120V, L200, L200V, LC200V, NL120V, NLC120V, WF-L120V, WF-L200, WF-L200V, WF-LC200V, WF-NL120V, WF-NLC120V, WFI-NL120V, WFINL120V, WFL120V, WFL200, WFL200V, WFLC200V, WFNL120V, WFNLC120V

Installation Instructions:

1. Twist the old filter a quarter-turn counterclockwise
2. Pull the filter straight out (don't worry, the water will shut off automatically)
3. Remove the reusable color-keyed knob from the end
4. Discard the old filter
5. Slide the knob onto the end of the new filter
6. Push the new filter into the fridge until it stops
7. Twist the filter a quarter-turn clockwise
8. Reset your 'change filter' light (if your fridge has one)

Resetting your 'change filter' indicator:

1. Press the light switch (the one that the refrigerator door presses every time you close the door) 5 times within 10 seconds or if the fridge has a filter button, press and hold it for 5-10 seconds