X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

6541-383 Replacement Pool and Spa Filter by Tier1

SKU
TIER1-PAS-1342
Price $34.19 List Price Price $48.99 Save 30%
Availability: In Stock
Fits the Jacuzzi Premium J-300 and J400
Available Add-Ons
x

SKU: TIER1-PAS-WAND-BRUSH › See more product details

Tier1 Pool Filter Cartridge Wand Cleaner Brush

Add: $16.99 $11.65
  • Premium Flat bonded filter media for effective filtration across 100% of the filter's surface.
  • Worry-free sediment reduction for 3 months
  • Cost-effective replacement
  • Pleated filter design captures maximum level of sand, sediment, and large debris.
› See more product details
  • Premium Flat bonded filter media for effective filtration across 100% of the filter's surface.
  • Worry-free sediment reduction for 3 months
  • Cost-effective replacement
  • Pleated filter design captures maximum level of sand, sediment, and large debris.
Tier1 PAS-1342 Replacement Pool and Spa Filter fits the Jacuzzi Premium J-300 and J400. Tier1 Pool and Spa filters will protect your investment engineered to outperform the competition and exceed your expectations. Features high durability flat bonded filter media that maintains strength even when loaded with sediment. Flat bonded media provides effective filtration across 100% of the media surface compared to point bond media where up to 25% of the filter surface is blocked by the fiber bonds. Supported by a high strength, high flow core to support industry leading flow rates the Tier1 Pool and Spa filters will clean your water faster and more efficiently with less wear and tear on your pump. Dive in with Tier1, the water's great!
More Information
Package Qty 1
Replaces Filbur FC-2715
Replaces Pleatco PJW60TL-OT-F2S
Replaces Unicel 6CH-961
Bottom Hole Size 2 inches SAE
Filter Bottom Type Screw-in Thread
Filter Top Type Handle
Pool/Spa Manufacturer Tier1
Manufacturer's Id PAS-1342
UPC 700355942924
Media Weight (oz) 3
Media Square Feet 60
Actual Size (in) 15 1/2 inches (length) x 6 3/4 inches (outside diameter)
Actual Size (cm) 39.37 x 16.8275
Inside Diameter (inches) 2
Outside Diameter (inches) 6.75
Primary Filter Media Flat Bonded Pleated Fabric
Filter Life (months) Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x 3 months
Country of Manufacture China
Warranty Guarantee 30 day 100% satisfaction guarantee

The TIER1-PAS-1342 is comparable with the following part numbers

6541-383 6CH-961
FC-2715 PAS-1342
PJW60TL-OT-F2S SD-00641

The TIER1-PAS-1342 fits the following model numbers

j-300 j300
j 300 j-400
j400 j 400

Instructions

  1. It is time to clean or replace your filter cartridge when the pressure gauge on your filter tank reaches 8 psi above the pressure recorded when a new cartridge has been installed.
  2. It is also time to clean or replace your filter cartridge if there is a noticeable decrease in the pressure coming from your return jets.
  3. Turn the power off to your pump and bleed the excess air pressure of the system using the air valve on the filter.
  4. Remove any band clamps and/or lids to your filter.
  5. Remove the cartridge from the filter canister and dislodge any loose debris by directing a stream of water from a garden hose between each pleat.
  6. Do not use a high pressure car wash wand or a stiff brush to clean your cartridge. These abrasive methods may damage the filter media and snap the bands.
  7. Apply a spray on filter cleaner to the cartridge or grid to remove any oils or other organics. If stubborn stains persist, soak the cartridge overnight in a solution of TSP (trisodium phosphate).
  8. Rinse the cartridge thoroughly with clean fresh water and return it to the filter tank. Secure the tank lid and any band clamps.
  9. Restart your filtration system per manufacturer's instructions.