EC-3 TDS & Temp Meter Video Transcript

Hey everyone, Tony the Filter Doctor here. Today we’re looking at the HM Digital EC-3. Now, the EC-3 is a combination electrical conductivity and temperature meter. It comes from the factory pre-calibrated with a range of 0 to almost 10,000 microsiemens. It also measures the temperature from 0 to 80 degrees Celsius. And it’s very accurate with an accuracy of plus or minus 2% on either the conductivity or the temperature reading. It has an auto shut-off feature, and uses two 1.5 volt button batteries, with an expected life of approximately 1,000 hours. Now, conductivity meters are used in a variety of applications, but those of you who want your readings in microsiemens will especially appreciate a conductivity meter over a TDS meter, which, of course, gives readings in parts per million. Now, you can convert electrical conductivity to TDS if you wish, and the reverse is also true, but if you want your readings in microsiemens and you don’t want to have to do the math every single time, then the EC-3 is what you’re looking for. Now, the EC-3 is separated from some of HM Digital’s other conductivity meters by one feature, and that’s this handy carrying case with a belt clip. Those of you who use your conductivity meter on a daily basis can appreciate why having a carrying case is a really nice feature. Now let me zoom in here closely and show you what this looks like. Again, this is the EC-3 from HM Digital, and I’m your host Tony the Filter Doctor. Thanks for watching. 

See detailed specifications and purchase the EC-3 here.