select Compare (0)
Compare Products

You have no items to compare.

American Plumber W34-PRM Metered Water Filter Housing

More Views

American Plumber W34-PRM Metered Water Filter Housing

0 0
The American Plumber W34-PRM water filter housing is a standard housing for whole house applications with an integral mounting bracket. The W34-PRM filter housing uses a 3 color monitor that indicates when to change the water filter cartridge. The whole house system cannot be operated without the meter. The American Plumber W34-PRM housing has a pressure relief button to relieve the water pressure when changing water filters. The W34PRM water filter housing can be used with a sediment filter to reduce sediment, sand, and silt. The W34PRM filter system can also be used with a carbon filter to reduce chlorine taste and odor. The American Plumber W34-PRM has 3/4-inch NPT inlet/outlets. The American Plumber W34-PRM housing is made by Pentek (Pentair Inc.). The American Plumber W34-PRM housing uses 10 L x 2.50 W water filters.
Actual Size (in) 15 inches (length) x 5 3/4 inches (width)
Actual Size (cm) 38.1 x 14.605
Operating Pressure (psi) 30 - 125
Operating Temperature (°F) 40 - 100
Operating Temperature (°C) 4.4 - 37.8
Fitting Type NPT
Fitting Size (inches) 3/4 inch
Color / Finish Gray
  • American Plumber W34-PRM Filter Housings Also Known As:
  • American Plumber 152082 water filter housing, Pentek 150554 water filter housing, Pentek 150574 water filter housing
  • American Plumber W34-PRM Water Filter Cartridges:
  • The American Plumber W34-PRM whole house water filter housing can use any 10" x 2.5" water filter.
  • American Plumber W34-PRM Filter Housing Replacement Parts:
  • The replacement O-Ring for the American Plumber W34-PRM is the OR-34 o-ring
  • Use o-ring silicone grease to lubricate the o-rings.
  • The American Plumber W34-PRM wrench is the SW-2 wrench.