Ametek / Pentek CP-10 Pleated Sediment Water Filter (9-3/4-inch x 2-5/8-inch)
The Pentek CP10 filter cartridge is a special formulation of resin-impregnated cellulose and polyester fibers. The Pentek CP-10 water filter cartridges provide higher wet strength than regular cellulose cartridges. The Ametek CP-10 water filters also provide high flow rates and dirt-holding capacity, while maintaining extremely low pressure drop. The Pentek CP-10 water filters have minimal unloading and media migration. The CP-10 filter media is pleated around a polypropylene core for added strength and the ends are immersed in a thermosetting vinyl plastisol. Embedding and sealing each end of the pleat block in this fashion fuses the components together, forming a unitized end cap and gasket. The Pentek CP-10 replacement filter cartridge is not recommended for non-chlorinated water supplies. Cellulose may start to break down if there is bacteria present in well water or other non-chlorinated water supplies. NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Nominal 10 micron Pentek CP-10 Pleated Cellulose Polyester Water Filter Cartridge.