3M Aqua-Pure AP811-2 Whole House Filter

SKU
AQUAPURE-AP811-2
Price $58.99
Availability: In stock
The AP811-2 by 3M Aqua-Pure water filter replacement cartridge reduces dirt and rust up to 25 microns. This 3M Aqua-Pure larger diameter dirt and rust cartridge is for larger homes and commercial applications. The 3M Aqua-Pure AP811-2 dirt & rust water filter cartridge is made from an exclusive process using pure white cellulose fibers. As water passes from the outer surfaces into the center of the cartridge, the filtering pores become increasingly smaller to remove even microscopic particles. Unlike string-wound and pleated paper cartridges, the rigid, sturdy construction of the 3M Aqua-Pure cartridges are able to withstand high pressure drop and stressful conditions such as water hammer.
Package Qty 1
Used In Brands Aqua-Pure
Manufacturer's Id AP811-2
UPC 016145171277
Advertised Size (in) 20 x 4-1/2
Actual Size (in) 20 inches (length) x 4 1/2 inches (outside diameter)
Actual Size (cm) 50.8 x 11.43
Media Spun Wound Grooved Polypropylene
Primary Filter Media Polypropylene
Filter Life (months) 6 months
Micron Rating (Nominal) 25
Operating Pressure (psi) 0 - 690
Operating Temperature (°F) 40 - 100
Operating Temperature (°C) 4.4 - 37.8
Flow Rate (gpm) 45
Flow Rate (lpm) 170.343

Contaminants

Reduces the following contaminants:

  • Dirt
  • Particulates
  • Rust and Corrosion
  • Sediment

The AQUAPURE-AP811-2 is comparable with the following part numbers

AQUAPURE-AP811-2 5577909
55779-09 56122-07
Ametek / Pentek DGD 7525-20 155356-43 AP802
AP802-1.5 AP802-1.5C
AP811-2 AP-811-2
56189-05

Installation Guide

User Guide

Instructions

  1. The 3M Aqua-Pure AP811-2 water filter needs to be replaced every 6 months. The filter may need to be replaced sooner depending on your water quality and your water usage
  2. Turn off incoming water
  3. Bleed pressure from the unit by depressing the red button on top of unit
  4. Remove housing by sliding wrench up toward head then turn left to unscrew
  5. Wipe housing clean and insert new cartridge
  6. Lubricate o-ring and screw housing into head
  7. Turn water back on

Reset Instructions