3M Aqua-Pure AP814-2 Whole House Filter

SKU
AQUAPURE-AP814-2
Price $55.99
Availability: Discontinued
The AP814-2 by 3M Aqua-Pure water filter replacement cartridge reduces dirt and rust up to 50 microns. This larger diameter dirt and rust cartridge is for larger homes and commercial applications. The 3M Aqua-Pure AP814-2 dirt & rust water filter cartridge is made from an exclusive process using pure white cellulose fibers. As water passes from the outer surfaces into the center of the cartridge, the filtering pores become increasingly smaller to remove even microscopic particles. Unlike string wound and pleated paper cartridges, the rigid, sturdy construction of the 3M Aqua-Pure cartridges are able to withstand high pressure drop and stressful conditions such as water hammer.
Package Qty 1
Used In Brands Aqua-Pure
Manufacturer's Id AP814-2
UPC 16145814204
Advertised Size (in) 20 x 4-1/2
Actual Size (in) 20 inches (length) x 4 1/2 inches (outside diameter)
Actual Size (cm) 50.8 x 11.43
Media String Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (months) 12 months
Micron Rating (Nominal) 50
Operating Pressure (psi) 25 - 125
Operating Temperature (°F) 40 - 100
Operating Temperature (°C) 4.4 - 37.8
Flow Rate (gpm) 60
Flow Rate (lpm) 227.125

Reduced Contaminants

The AQUAPURE-AP814-2 reduces the following contaminants:

  • Dirt
  • Sediment

The AQUAPURE-AP814-2 is comparable with the following part numbers

5599403 55994-03
Ametek / Pentek WPX50BB20P AP802
AP802-1.5 AP802-1.5C
AP814-2 AP-814-2

Installation Guide

Instructions

  1. The 3M Aqua-Pure AP814-2 water filter needs to be replaced every 3-4 months. The filter may need to be replaced sooner depending on your water quality and your water usage
  2. Turn off incoming water
  3. Bleed pressure from the unit by depressing the red button on top of unit
  4. Remove housing by sliding wrench up toward head then turn left to unscrew
  5. Wipe housing clean and insert new cartridge
  6. Lubricate o-ring and screw housing into head
  7. Turn water back on

Reset Instructions