We use cookies to make your experience better.
Rusco FS-1-140ST Sediment Trapper Polyester Replacement Filter
SKU
RUSCO-FS-1-140ST
Price $17.99 List Price Price $25.99 Save 30%
Availability: In Stock
Choose a quantity
1 Filter $17.99 -
3 Filters Price $16.93 each -
6 Filters Price $16.19 each
- Advertised size includes ball valve attachment
Rusco sediment filters make solid particle removal simple and economical. The Rusco replacement filter screen can be cleaned several times before needing to be replaced. The Rusco filter screen is easy to clean. No tools required. This Rusco replacement filter element is made of polyester. The Rusco sediment screen elements are also available in stainless steel for heavy duty sediment filtration.
Package Qty | 1 |
---|---|
Used In Brands | Rusco |
Manufacturer's Id | FS-1-140ST |
UPC | 659498005303 |
Advertised Size (in) | 14-3/8 x 5 |
Actual Size (in) | 5 1/4 inches (length) x 1 1/4 inches (outside diameter) |
Actual Size (cm) | 13.335 x 3.175 |
Mesh Size | 140 |
Media | Pleated Polyester w/ Screen |
Primary Filter Media | Pleated Polyester |
Micron Rating (Nominal) | 104 |
Fitting Size (inches) | 1 inch |
Reduced Contaminants
The RUSCO-FS-1-140ST reduces the following contaminants:
- Dirt
- Sand
- Sediment
- Silt
Instructions
- After you have installed your Rusco system, you can simply turn the flush valve parallel with the system when you notice excessive buildup of sediment
- You should clean your filter screens every few months and replace them every 6-12 months depending on your water usage
- The primary method of cleaning the Rusco filter is purging separated solids through the flush valve while the filter is under system pressure (can be done manually with the flush valve or automated with the optional Automatic Flush Valve)
- The filter element may need to be removed and cleaned
- To remove the filter element turn off the water supply and drain water pressure
- Unscrew the clear cover and remove the filter element
- Wash off collected sediment by spraying with water
- Remove fine particles wedged in the screen with a soft brush
- Apply silicone grease to o-rings, if needed, and reassemble
- HAND TIGHTEN ONLY