select Compare (0)
Compare Products

You have no items to compare.

Culligan HF-150A Whole House Water Filter Housing

More Views

Culligan HF-150A Whole House Water Filter Housing

0 0
$23.99 (Retail Price: $33.59 )
    • Quantity
    • Unit Price
    • 6 +
    • $23.89
The Culligan HF-150 Whole House Water Filter extends the life of household appliances such as washing machines, hot water heaters, dishwashers, water softeners, and other fixtures by reducing dirt, sand, and silt out of household plumbing lines. The Culligan HF-150 is easy to install with a 3/4-inch inlet/outlet for installation on the main cold water line. The Culligan HF-150 is a blue, durable, opaque housing. The HF-150 system has an integrated pressure relief valve for easy cartridge changes. The dynamically sealing, self-cleaning o-ring prevents leaks and clogging. The Culligan HF-150 is the same as the Culligan 151197, Pentek 150067, Pentek 150068 w/o pressure release filter housings. Culligan has replaced the HF-150 with the HF-150A. The UPC Code has remained the same because the housings have remained the same except the threads on the cap that the sump screws on to are slightly different. If you are looking to replace the HF-150 sump with a HF-150A sump, you may be able to interchange the two with a new o-ring and plenty of tightening. However, you may need to change the cap as well if this does not work. The Culligan HF-150 is the same as the Pentek 10-ST-VIH number 10 VIH Standard Housing, but the 10-ST-VIH has advanced Valve-In-Head technology. The Valve in Head turns the water supply off for easy cartridge changeouts. Two number 10 Standard housings can be connected with a pipe nipple or pipe union. There are several pipe nipples available.
  • Genuine OEM Product
Used In Brands Culligan
Manufacturer's Id HF-150
UPC 033663005365
Advertised Size (in) 10 x 2-1/2
Actual Size (in) 12 inches (length) x 5 1/4 inches (outside diameter)
Actual Size (cm) 30.48 x 13.335
Operating Pressure (psi) 30 - 125
Operating Temperature (°F) 40 - 100
Operating Temperature (°C) 4.4 - 37.8
Fitting Size (inches) 3/4 inch
Warranty Guarantee 5 year limited warranty
Includes Housing, Installation and operating instructions
  • Culligan HF-150 Whole House Replacement Water Filter Information:
  • The water filter cartridge is not included with the housing. This allows you to purchase the best water filter for your water supply.
  • The water filter cartridge life depends on the water filter cartridge purchased, the quality of your water, and the amount of water used. You will know when to change the filter cartridge when your water pressure drops.
  • Sediment water filters reduce dirt, sand, silt, sediment, rust particles, and scale particles. Choose from one of our sediment water filters at the 10" L x 2.5" W Standard Filter Page.
  • Drinking water filters produce healthier, better-tasting drinking water by reducing chlorine taste and odor and other contaminants. Choose from one of our carbon drinking water filters at the 10" L x 2.5" W Standard Filter Page.
  • Most Popular Water Filters for the Culligan HF-150 Whole House Housing:
  • Sediment Filters:
    P5 5 Micron Sediment Filter
    ECP5-10 5 Micron Pleated Filter (Recommended for chlorinated water only)
  • Carbon Filters:
    CBC-10 0.5 Micron Chlorine Taste & Odor and Cyst Reduction Carbon Block Filter
    GAC-10 20 Micron Chlorine Taste & Odor Reduction Filter
  • Recommended Parts & Accessories:
  • Replacement OR-34 O-Rings. One o-ring is included with the housing purchase, but you should replace the o-ring periodically to prevent leaks.
  • Use silicone grease to lubricate the o-rings to prevent leaking.
  • Use the SW-2 housing wrench to remove the sump. The wrench should NOT be used to tighten the sump back onto the cap. Over tightening may cause damage to the o-ring.
  • Use a single UB-1 stainless steel mounting bracket to mount the whole house housing.