EV9617-36 Everpure Comparable Food Service Replacement Filter by Tier1

SKU
TIER1-FS-1005
Price $35.99
Availability: In stock
Choose a quantity
  • 1 Filter $35.99  
  • 3 Filters Price $34.89 each
  • 6 Filters Price $33.89 each
  • Reduces chlorine taste and odor, and scale from your water
  • Change the filter every 6 months to maintain quality
  • Used in QL2, QL3, QL7I Single Heads
  • Comparable part numbers: 4CB5-K | EV9617-36 | ELF-5M-KDF-P
See more product details
The EV9617-36 Everpure Comparable Food Service Replacement Filter by Tier1, is efficient, effective, and easy to use. The twist in and out design makes installation possible within minutes. Furthermore, this filter reduces Chlorine Taste and Odor, as well as scale from your water, to improve flavor and prevent scale build up on expensive machinery. To maintain quality replace every 6 months! Order this high quality Tier1 filter today!
Package Qty 1
Manufacturer's Id FS-1005
UPC 635510439110
Actual Size (in) 12-7/10 inches (length) x 3-4/5 inches (diameter)
Actual Size (cm) 32.258 x 7.9375
Media Carbon Block with Scale Inhibitor
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 1,000
Filter Life (liters) 37,854
Filter Life (months) 6 months
Micron Rating (Nominal) 5
Operating Pressure (psi) 0 - 125
Maximum Operating Pressure (psi) 125
Operating Temperature (°F) 40 - 100
Operating Temperature (°C) 4.4 - 37.8
Flow Rate (gpm) 1.67
Flow Rate (lpm) 6.322
Certifications NSF/ANSI Standard 42
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Primary Filter Media Activated Carbon Block

Reduced Contaminants

The TIER1-FS-1005 reduces the following contaminants:

  • Bad Taste and Odor
  • Chlorine Taste & Odor
  • Hard Scale

The TIER1-FS-1005 is comparable with the following part numbers

4CB5-K
EV9617-36
ELF-5M-KDF-P

The TIER1-FS-1005 fits the following model numbers

QL2, QL3, QL7I Single Head

Instructions

  1. Shut off water supply
  2. Unlock and remove old filter cartridge
  3. Insert and lock new cartridge filter into head assembly
  4. Turn on water and check for leaks
  5. If leaks occur, repeat step 3
  6. Flush 5 gallons of water through new filter cartridge prior to use
  7. Install in cold water applications only
  8. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit
  9. Install in compliance of local and state regulations

Reset Instructions