EV9618-02 Everpure Comparable Food Service Replacement Filter by Tier1

SKU
TIER1-FS-1006
Price $21.99
Availability: In Stock
Choose a quantity
  • 1 Filter $21.99  
  • 3 Filters Price $21.29 each
  • 6 Filters Price $20.69 each
  • Change the filter every 6 months
  • Reduces chlorine taste and odor, cysts, and hardness
  • Used in QL1, QL2, QL3, QL3B, QL7I Single Heads
  • Comparable part numbers: OCS2 | EV9618-07 | EV9618-01 | EV9618-02 | EV9618-06 | E5420-P-1M-SB | 9618-07 | AP317
See more product details
The EV9618-02 Everpure Comparable Food Service Replacement Filter by Tier1, makes sure all of your water quality concerns are taken care of. Taste and sanitary issues are covered with chlorine reduction, while its water hardness properties help to prevent costly repair to your appliances due to build up damage. Installation is easy. Order today!
Package Qty 1
Used In Brands Everpure, Omnipure
Manufacturer's Id FS-1006
UPC 635510439158
Actual Size (in) 8 inches (length) x 2-1/2 inches (diameter)
Actual Size (cm) 20.32 x 6.35
Media GAC with Polyphosphate and Scale inhibitor
Primary Filter Media Granular Activated Carbon
Filter Life (gallons) 1,500
Filter Life (liters) 5,678
Filter Life (months) 6 months
Micron Rating (Nominal) 1
Operating Pressure (psi) 0 - 125
Maximum Operating Pressure (psi) 125
Operating Temperature (°F) 35 - 100
Operating Temperature (°C) 1.7 - 37.8
Flow Rate (gpm) 0.5
Flow Rate (lpm) 1.893
Certifications NSF/ANSI Standard 42
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Primary Filter Media Granular Activated Carbon

Reduced Contaminants

The TIER1-FS-1006 reduces the following contaminants:

  • Bad Taste and Odor
  • Chlorine Taste & Odor
  • Cysts
  • Hardness

The TIER1-FS-1006 is comparable with the following part numbers

OCS2 EV9618-07
EV9618-01 EV9618-02
EV9618-06 E5420-P-1M-SB
9618-07

The TIER1-FS-1006 fits the following model numbers

QL2, QL3, QL7I Single Head

Instructions

  1. Shut off water supply
  2. Unlock and remove old filter cartridge
  3. Insert and lock new cartridge filter into head assembly
  4. Turn on water and check for leaks
  5. If leaks occur, repeat step 3
  6. Flush 5 gallons of water through new filter cartridge prior to use
  7. Install in cold water applications only
  8. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit
  9. Install in compliance of local and state regulations

Reset Instructions