Maytag UKF7003 EveryDrop EDR7D1 (Filter 7) Ice and Water Refrigerator Filter

Introducing the EveryDrop Ice and Water Refrigerator Filter 7 by Whirlpool: an engineered filter replacement for the Whirlpool UKF7003 with upgraded contaminant reduction. NSF certified increase in the number of reduced contaminants from 3 to 7 including waterborne parasites, chlorine taste and odor, pesticides, industrial chemicals, metals, minerals, and more. The other difference is in the attractive design created with dashing colors and approachable model numbers set out to make sure that you get the right filter for your refrigerator. Order now!

• A new and improved alternative to the Whirlpool UKF7003
• For best results, change filter every 6 months
• Installation is a breeze with easy-to-turn design
• Retail packaging may vary
• Genuine OEM Product

Reduces the following contaminants:

• 1,2-Dichlorobenzene / O-Dichlorobenzene (ODCB)
• 1,4-Dichlorobenzene / P-dichlorobenzene (p-DCB)
• 2,4-Dichlorophenoxyacetic Acid (2,4-D)
• Asbestos
• Atrazine
• Bad Taste and Odor
• Benzene
• Bisphenol A
• Carbofuran
• Chlorine Taste & Odor
• Cysts
• DEET
• Endrin
• Ethylbenzene
• Lead
• Lindane
• Linuron
• Mercury
• Metolachlor
• Methyl tertiary butyl ether (MTBE)
• Nonylphenol
• Odor
• Particulates
• Particulates (Class I)
• Particulates (Class II)
• Styrene
• Tetrachloroethylene / Perchloroethylene (PERC)
• Toluene
• Toxaphene
• Turbidity
• VOCs

Used In Brands	Jenn-Air, Maytag, Tier1, Whirlpool
Manufacturer's Id	EDR7D1
UPC	883049362526
Actual Size (in)	7 1/2 inches (length) x 4 inches (outside diameter)
Actual Size (cm)	18.9484 x 10.16
Media	Carbon Block
Primary Filter Media	Activated Carbon Block
Filter Life (gallons)	200
Filter Life (liters)	757.08
Filter Life (months)	6 months
Color / Finish	White
Certifications	NSF/ANSI Standard 42

Instructions

1. 1. Note: Filter must be pushed firmly into receiver and turned until filter is locked in place. If filter is not locked correctly, water will not flow.
2. 2. DO NOT use any tools to install this filter
3. 3. Twist the old filter a quarter-turn counterclockwise
4. 4. Pull the filter straight down and discard (don't worry, the water will shut off automatically)
5. 5. Push the new filter up into the fridge until it stops
6. 6. Twist the filter a quarter-turn clockwise
7. 7. Reset your change filter light (if your fridge has one)
8. 8. Flush filter with 3-4 gallons of with water until water runs clear. Some noise is not uncommon as air is purged from the system.

Resetting Your Filter Change Indicator