Tier1 Fisher & Paykel 836848 Refrigerator Water Filter Replacement Comparable

Price $38.99
Availability: In stock
Choose a quantity
  • 1 Filter $38.99  
  • 3 Filters Price $37.99 each
  • 6 Filters Price $36.99 each
  • Installs quickly and easily
  • Reduces many common water contaminants
  • Lasts for up to six months, or 300 gallons, depending on use
  • A cost effective alternative to expensive brand name refrigerator water filters
See more product details
A Fisher & Paykel 836848 Refrigerator Water Filter Replacement comparable, the Tier1 RWF1080 reduces common contaminants, including chlorine, sediment, silt and more. The RWF1080 installs quickly and easily, requiring no tools. By reducing impurities, this filter will improve the taste and clarity of your water and ice moments after installation. Order the Fisher & Paykel 836848 Refrigerator Water Filter Replacement comparable by Tier1 now!
Package Qty 1
Used In Brands Fisher & Paykel, Tier1
Manufacturer's Id RWF1080
UPC 635510407669
Actual Size (in) 7 3/4 inches (length) x 2 1/2 inches (outside diameter)
Actual Size (cm) 19.685 x 6.35
Media Carbon Block
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 300
Filter Life (liters) 1,135.62
Filter Life (months) 6 months
Operating Pressure (psi) 30 - 125
Operating Temperature (°F) 38 - 100
Operating Temperature (°C) 3.3 - 37.8
Flow Rate (gpm) 0.5
Flow Rate (lpm) 1.89
Certifications Filter cartridge has been Tested and Certified by NSF International against NSF/ANSI 42 for materials and structural integrity requirements
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Primary Filter Media Activated Carbon Block


Reduces the following contaminants:

  • Chlorine Taste & Odor
  • Rust and Corrosion
  • Sand
  • Sediment
  • Silt
  • Turbidity

The TIER1-RWF1080 is comparable with the following part numbers

836848 WF296 WF-296 EFF6017A
EFF6017 EFF-6017A EFF-6017 RWF1080
RWF-1080 WD-836848 FISHER-PAYKEL-836848 ECOAQUA-EFF-6017A

The TIER1-RWF1080 fits the following model numbers



  1. Note: Filter must be pushed firmly into receiver and turned until filter is locked in place. If filter is not locked correctly, water will not flow.
  2. Shut off water supply
  3. Twist the old filter a quarter-turn counterclockwise and remove
  4. Insert new filter into the refrigerator receiver, push the new filter until it stops
  5. Twist the filter a quarter-turn clockwise
  6. Reset water filter status display
  7. Flush filter with 3-4 gallons of with water until water runs clear. Some noise is not uncommon as air is purged from the system.
  8. If filter sits for several days without use, flush a quart of water through the filter to remove stale water from refrigerator water lines

Reset Instructions

  1. Press the water filter reset button and hold for 3 seconds