Frigidaire WF1CB PureSource Refrigerator Water Filter

The Frigidaire PureSource Refrigerator Water Filter fits Frigidaire and Kenmore Energy Star compliant refrigerators made after April 2001 where the filter is inside of a round plastic housing. The filter uses Activated Carbon Block to remove contaminants. Simple replacement schedule of every 6 months.

• Genuine OEM Product

Reduces the following contaminants:

• 96.50% of Chlorine Taste & Odor
• The WF1CB does not reduce fluoride
• 98.30% of Particulates (Class III)

Used In Brands	Frigidaire, Kenmore
Manufacturer's Id	WF1CB
UPC	012505751349
Actual Size (in)	4 1/8 inches (length) x 1 7/8 inches (outside diameter)
Actual Size (cm)	10.48 x 4.7625
Media	Carbon Block
Primary Filter Media	Activated Carbon Block
Filter Life (gallons)	400
Filter Life (liters)	1,514.16
Filter Life (months)	6 months
Operating Pressure (psi)	0 - 100
Operating Temperature (°F)	33 - 100
Operating Temperature (°C)	0.6 - 37.8
Flow Rate (gpm)	0.5
Flow Rate (lpm)	1.893
Certifications	NSF/ANSI Standard 42

The WF1CB is also known by the following part numbers:

• WF1CB, WF284, 04609910000, 218717805, 218994101, 240389101, 240389102, 240394501, AP2539088, NGRG-100, NGRG-2000, NGRG100, NGRG2000, PS503619, PS890550, RF-100, RF100, RG-100, RG100, SWF1CB, WF-284, WFB

Instructions

1. 1. Unscrew the filter cup and dump out the water
2. 2. Pull the old filter straight down and discard
3. 3. Place the new filter in the filter cup
4. 4. The end of the filter with the small o-ring should be up
5. 5. Screw the filter cup (with filter) up onto the housing
6. 6. The filter will self-align as the cup is tightened
7. 7. Reset your 'change filter' light (if your fridge has one)

Resetting Your Filter Change Indicator