select Compare (0)
Compare Products

You have no items to compare.

GE Desal AG3308T Ametek 10-inch RO Membrane

More Views

GE Desal AG3308T Ametek 10-inch RO Membrane

0 0
The GE Desal AG3308T Ametek reverse osmosis elements are used for brackish water desalination. The Desal AG3308T RO element is tape wrapped. The A-Series thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. GE Osmonics Desal AG3308T High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers and are designed with flush end connections. These elements allow moderate energy savings, and are considered a standard in the industry. The GE Desal AG3308T is designed to replace a 10-inch Ametek element by fitting into an Ametek housing that has been equipped with a brine control valve.
  • GE Desal AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig are desired
  • GE Desal AG3308T RO Element Specs:
  • Flow Rate: 320 Gallons Per Day
  • Dimensions: 3.3" W X 8" L
  • Membrane: Thin Film Membrane
  • Typical Operating Pressure: 200 psig
  • Maximum Pressure: 450 psig
  • Maximum Temperature: 122 F (50 C)
  • Chlorine Tolerance: 1,000 ppm-hrs, dechlorination recommended
  • Optimum Rejection pH: 7.0 -7.5
  • Operating pH Range: 4.0 - 11.0
  • Cleaning pH Range: 2.0 - 11.5
  • Feed NTU: <1
  • Feed SDI: <3
  • Average Rejection: 99.5%
  • Minimum Rejection: 99%
  • Typical Operating Flux: 10-20 GFD (15-35) L.H-1.M-2
  • Part #'s also associated with GE Desal AG3308T RO Element:
  • Desal Part # 1206740