select Compare (0)
Compare Products

You have no items to compare.

GE Desal HL3308T Ametek 10-inch RO Membrane

More Views

GE Desal HL3308T Ametek 10-inch RO Membrane

0 0
The GE Desal HL3308T Ametek Nanofiltration Elements are used for water softening, color removal, and reduction of THM potential. The GE HL3308T nanofiltration element is tape wrapped. The H-Series thin-film nanofiltration membrane elements are characterized by an approximate molecular weight cut-off of 150-300 daltons for uncharged organic molecules. GE Osmonics Desal HL3308T Water Softening elements feature a tape outerwrap and 28 mil feed spacers and are designed with flush end connections. The GE Desal HL3308T is designed to replace a 10-inch Ametek element by fitting into an Ametek housing that has been equipped with a brine control valve.
  • GE Desal HL3308T Nanofiltration Element Specs:
  • Flow Rate: 230 Gallons Per Day
  • Dimensions: 3.3" W X 8" L
  • Membrane: Thin Film Membrane
  • Typical Operating Pressure: 100 psig
  • Maximum Pressure: 450 psig
  • Maximum Temperature: 122 F (50 C)
  • Chlorine Tolerance: <0.1 ppm
  • Optimum Rejection pH: 7.0 -7.5
  • Operating pH Range: 3.0-9.0
  • Cleaning pH Range: 1.0-10.0
  • Feed NTU: <1
  • Feed SDI: <2
  • Average Rejection: 98%
  • Typical Operating Flux: 12-20 GFD (20-35) L.H-1.M-2
  • Part #'s also associated with GE Desal HL3308T Nanofiltration Element:
  • Desal Part # 1207232