Tier1 20 inch x 4.5 inch Sediment Water Filter (50 Micron)

The Tier1 20 inch x 4.5 inch sediment water filter (50 Micron) is sized 20 x 4.5 inches and helps reduce dirt, sand, sediment, and silt in your water. Spun wound polypropylene filter media reduces these contaminants at a size as small as 50 microns and helps inhibit the growth of bacteria. The graded density of this filter gives it a much greater dirt-holding capacity making it ideal as a pre-filter for reverse osmosis (RO) systems, drinking water systems, and more. This Tier1 product will deliver the high quality water you deserve at a more affordable price. Order the Tier1 20 inch x 4.5 inch sediment water filter (50 Micron) today!

Reduces the following contaminants:

• Dirt
• Sand
• Sediment
• Silt

• Tier1 P50-20BB-WF Sediment Water Cartridge Specs:
• Dimensions: 20" L x 4-1/2ï¾” W
• Inside Diameter: 1.1ï¾”
• Initial Pressure Change @ Flow: 1 psi @ 20 gpm
• Temperature Range: 40 F TO 145 F (4.4 C TO 62.8 C)
• Filter Media: Polypropylene
• Maximum Pressure Drop: 69°F (20°C) 46.4 psi (3.2 kg/cm²)
• Recommended Replaceable Pressure Drop: 21.75 psi (1.5 kg/cm²)

• The Tier1 P50-20BB-WF Sediment Filter is a compatible replacement for:
• Liquatec SDF-45-2050 Water Filter
• Watts FPMB-BB50-20 Water Filter
• Hydronix SDC-45-2050 Water Filter

Instructions

1. 1. Each time you replace your filter, clean and inspect the o-ring in between the housing cap and sump. If there is any damage to the o-ring replace it
2. 2. After cleaning the o-ring apply a silicone lubricant, like OR-LUBRICANT-SM (purchasable separately)
3. 3. You must use a silicone food grade lubricant--all other types of lubricant could damage the o-ring
4. 4. Silicone lubricant prevents leaking and extends the life of the o-ring