select Compare (0)
Compare Products

You have no items to compare.

Hydrotech 12301 Series 1230 Reverse Osmosis System

More Views

Hydrotech 12301 Series 1230 Reverse Osmosis System

0 0
The Hydrotech 12301 Reverse Osmosis System is a point-of-use drinking water system which combines carbon filtration along with reverse osmosis technology to provide effective water treatment. The Hydrotech 12301 RO System is manufactured by Hydrotech and uses the Hydrotech membrane and filters. The Hydrotech 12301 Reverse Osmosis System is a 3 vessel RO system. The Hydrotech 12301 uses a TFC 50 GPD RO Membrane. This is a yellow membrane with a white band. The Hydrotech 12301 RO System is also known as the Hydrotech 41000032 Reverse Osmosis System.
  • Hydrotech 12301 Reverse Osmosis System Stages:
  • Stage 1: The 41400076 / Dual Purpose Carbon and Sediment Filter is used in the 1st housing. The Stage 1 filter should be changed every 6-12 months.

  • Stage 2: The 33001033 50 GPD TFC Membrane is used in the 2nd housing. The Stage 2 membrane should be changed approximately every 2 years.

  • Stage 3: The 41400009 / S-FS-19 Carbon Block Filter is used in the 3rd housing. The Stage 3 filter should be changed every 6-12 months.

  • Hydrotech 12301 RO System Parts:
  • Replacement O-Ring: The 34201026 O-Ring is a replacement o-ring that fits inside the housing sumps. The o-rings should be replaced every couple of filter changes. Be sure to use O-Ring Silicone Grease to lubricate the o-rings every time you change the filters.

  • Replacement Sump: The 20500023 Sump is a replacement sump and only needs to be replaced when your sump cracks or wears out.

  • Wrench: The 21401003 Wrench is a great tool for removing the sump when replacing the filters. DO NOT use the wrench to tighten the sump.

  • Hydrotech 12301 RO Filter Change Intervals:
  • The filter change interval will vary due to your water quality and the amount of water used.

Instructions