LT1000P LG Comparable Refrigerator Water Filter Replacement By Tier1

Price $34.99
Availability: Out of stock
Fits LG refrigerator models that use the LT1000P filter cartridge Does NOT reduce lead, mercury or asbestos
  • Installs in just minutes
See more product details
The Tier1 RWF1053 refrigerator water filter fits the refrigerator models requiring the LG LT1000P refrigerator filter. The activated carbon block effectively reduces contaminants like Chlorine taste and odor, sand, sediment, rust and unsightly turbidity. The RWF1053 should give you clean, clear water for up to 6 months or 200 gallons, depending on your local water quality and your usage. The filter should easily push into the manifold, and dual O-rings ensure a tight seal with no water leakage.
Package Qty 1
Used In Brands LG, Tier1
Manufacturer's Id RWF1053
UPC 0810004474031
Actual Size (in) 6 1/2 inches (length) x 1 3/4 inches (width) x 1 3/4inches (height)
Media Activated Carbon Block
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 200
Filter Life (months) 6 months
Operating Pressure (psi) 30 - 120
Operating Temperature (°F) 33 - 100
Flow Rate (gpm) 0.5
Fitting Type Quick-Change
Certifications NSF/ANSI Standard 42
Warranty Guarantee Unconditional Product Guarantee for the Life of the Product
Primary Filter Media Activated Carbon Block

Reduced Contaminants

The TIER1-RWF1053 reduces the following contaminants:

  • Chlorine Taste & Odor
  • Rust and Corrosion
  • Sediment

The TIER1-RWF1053 is comparable with the following part numbers

LG LT1000P LT1000PC
MDJ64844601 ADQ74793501
ADQ74793502 LT1000PCS
LT-1000PC KENMORE 9980

The TIER1-RWF1053 fits the following model numbers

LFXC24796D LFXS30796D LFXC24796S LFXS30796S
LMXC23796S LMXC23796D LMXS30796S LMXS30796D
LSFXC2496D LSXS26396S LSXS26396D LSXC22396S


  1. Note: To install this filter, push filter up into receiver until the filter stops. Ensure filter is locked into place. If the filter is not locked into place and clocked correctly the water will not flow. Flush 3-4 gallons of water through water the dispenser to ensure air has been purged from the system. Some noise is not uncommon as the air is purged during this flush.
  2. Press the sides of the case cover to open and remove the existing water filter by gently pushing downwards. Gently turn the existing filter counter clockwise and pull the water filter towards you which will slightly release and ready to be pulled out.
  3. Place the month sticker on the new filter space as a reminder to replace the filter within the next 6 months and remove red protective cap.
  4. Align and insert the new filter into the refrigerator manifold fitting. Gently turn clockwise until the new filter stops and close the case cover
  5. Check filter area for leaks
  6. Run water through the dispenser for approximately 4 minutes to flush the new filter
  7. Reset replacement indicator light by pressing the LIGHT/FILTER or RESET button for 3 seconds. If this reset procedure is not applicable for the new filter, please refer to your refrigerator owner's manual

Reset Instructions