The Omnipure K-Series K2333-JJ filters feature 1/4-inch quick-Connect compression fittings that allow for installation and replacement in a matter of seconds without the use of tools. Also known as Culligan 01-0000-79, 0100079, 01-0001-24, 01000124. Use as a post carbon filter in Culligan RO Systems, Stage 4 in Culligan H-5, H5, H-30S, H30S, H53, H-53, H83, H-83, H83SR, H-83SR, and Stage 3 in H8, H-8, AC30. The Omnipure K-Series Quick-Connect fittings are molded directly into the filter body and cap as a single unit, reducing the chance for weeping or seepage. Cap and body are spin-welded together producing a smooth, consistent seal without the use of glues or binders that can cause contamination. The Omnipure K2333-JJ water filter can be used as an RO postfilter. One of the primary uses of the K2333-JJ Water Filter is as a system component. Systems can be designed to incorporate the various lengths and diameters--either all the same size or intermixed--to meet specific filtration needs. The Omnipure K2333-JJ Acid Washed GAC Water Filter can be used in icemakers, refrigerators, beverage equipment, drinking fountains, under the counter systems, RO Systems and in conjunction with purification systems. The Omnipure K2333-JJ GAC water filter is an acid washed granular activated carbon filter used to reduce taste, odor and chlorine taste and odor.
- If present, remove the dust caps from the quick connect fittings at each end of the filter prior to installation (dust caps are to protect the filter in transit and will prevent water flow)
- Omnipure K2333-JJ water filters should be installed on cold water lines only
- Omnipure K2333-JJ water filters should not be used where the water is microbiologically unsafe