select
Compare (0)
Compare Products
You have no items to compare.
The Omnipure Q5386 GAC and polyphosphate water filter is very user-friendly. Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist. The new Q5386 filter body is just as easily threaded into the head and the replacement is then complete. The Omnipure Q5386 is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head. The Q5386 can be used in icemakers, refrigerators, beverage equipment, drinking fountains, undersink systems, and reverse osmosis systems. The Omnipure Q5386 GAC/Phosphate water filter consists of granular activated carbon used to reduce taste, odor and chlorine taste and odor along with a polyphosphate scale inhibitor.
- Made in the U.S.A.
- Genuine OEM Product
Reduces the following contaminants:
- Bad Taste and Odor
- Chlorine Taste & Odor
- The OMNIPURE-Q5386 does not reduce fluoride
- Hard Scale
- Particulates (Class I)
| Used In Brands | Omnipure |
|---|---|
| Manufacturer's Id | Q5386 |
| UPC | 799932588471 |
| Advertised Size (in) | 6 x 2-1/2 |
| Actual Size (in) | 6 1/4 inches (length) x 2 1/2 inches (outside diameter) |
| Actual Size (cm) | 15.88 x 6.35 |
| Media | Granular Activated Carbon with Polyphosphate |
| Primary Filter Media | Granular Activated Carbon |
| Post Filter Media | Polyphosphate |
| Filter Life (gallons) | 1,000 |
| Filter Life (liters) | 3,785.41 |
| Filter Life (months) | 6 months |
| Operating Pressure (psi) | 20 - 125 |
| Operating Temperature (°F) | 35 - 100 |
| Operating Temperature (°C) | 1.7 - 37.8 |
| Flow Rate (gpm) | 0.5 |
| Flow Rate (lpm) | 1.893 |
| Fitting Type | Quick Connect |
| Fitting Size (inches) | 1/4 inch |
| Additional Information | Volume: 14.7 Cu. In., Fitting Size: This Q-Series filter is a replacement filter and must be used with an existing Q-Series head |
- Omnipure Q5386 GAC & Phosphate Water Filters are designed to fit:
- Omnipure Twist Tap filter heads QNVH B, C, or J, with or without automatic shutoff.
- If you do not have a head for the Omnipure Q-Series filters, you can purchase one of the Omnipure Q-Series heads below in the Related Products section. These heads are valved which means the water will automatically shut off when replacing the Q-Series water filter. The heads are available with 1/4" quick connect fittings, 1/4" NPT, or 3/8" NPT.
