Omnipure Q5505 Q-Series Sediment Water Filter

SKU
OMNIPURE-Q5505
Price $16.79
Availability: In Stock
Choose a quantity
  • 1 Filter $16.79  
  • 3 Filters Price $15.59 each
  • 6 Filters Price $15.09 each
The Omnipure Q5505 inline filter is very user-friendly. Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist. The new Q5505 filter body is just as easily threaded into the head and the replacement is then complete. The Omnipure Q5505 is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head. The Omnipure Q5505 Water Filter can be used in icemakers, refrigerators, beverage equipment, drinking fountains, undersink systems, and reverse osmosis systems. The Omnipure Q5505 inline water filter is a 5 micron sediment filter used to reduce dirt, sand, and sediment.
Package Qty 1
Used In Brands Omnipure
Manufacturer's Id Q5505
UPC 799932588655
Advertised Size (in) 10 x 2-1/2
Actual Size (in) 10 inches (length) x 2 1/2 inches (outside diameter)
Actual Size (cm) 25.4 x 6.35
Media Polypropylene Depth Filtration
Primary Filter Media Polypropylene
Filter Life (gallons) 3,000
Filter Life (liters) 11,356.23
Filter Life (months) 12 months
Micron Rating (Nominal) 5
Maximum Operating Pressure (psi) 125
Operating Temperature (°F) 35 - 100
Operating Temperature (°C) 1.7 - 37.8
Flow Rate (gpm) 0.5
Flow Rate (lpm) 1.893

Reduced Contaminants

The OMNIPURE-Q5505 reduces the following contaminants:

  • Bad Taste and Odor
  • Chlorine Taste & Odor
  • Sediment

The OMNIPURE-Q5505 is comparable with the following part numbers

Q5505

Instructions

  1. Omnipure Q5505 water filters should be installed on cold water lines only
  2. Omnipure Q5505 water filters should not be used where the water is microbiologically unsafe
  3. Each time you change your filter, clean and apply silicone food grade lubricant (such as OR-LUBRICANT-LG or OR-LUBRICANT-SM) generously to both the small and large o-ring in the Q-Series Head
  4. It is recommended that you replace the Omnipure H-118 O-Ring every time you change your filter
  5. The H-118 O-Ring is the larger of the two o-rings in the Q-Series Head System
  6. If you do not replace the H-118 O-Ring, you may experience leaking because the o-ring adjusts to the shape of the old filter, which may be slightly different than the new filter
  7. The Omnipure H-011 O-Ring is the smaller o-ring in the Q-Series Head

Reset Instructions