Omnipure Q5515-P Q-Series Phosphate Lead Water Filter

SKU
OMNIPURE-Q5515-P
Price $35.09
Availability: In stock
Choose a quantity
  • 1 Filter $35.09  
  • 3 Filters Price $32.29 each
  • 6 Filters Price $31.29 each
The Omnipure Q5515-P is a 1 micron Carbon Block Lead Reduction Water Filter with Phosphate Scale Inhibitor. The Omnipure Q5515-P Carbon Block Lead Reduction and Scale Inhibitor water filter is very user-friendly. Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist. The new Q5515-P filter body is just as easily threaded into the head and the replacement is then complete. The Omnipure Q5515-P is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head. The Omnipure Q5515-P can be used as a pre or postfilter for Reverse Osmosis Systems, beverage equipment, drinking water fountains, ice machines, and other point-of-use applications. The Omnipure Q5515-P water filter and phosphate scale inhibitor is a granular activated carbon block filter used to reduce cysts, lead, scale, taste, odor and chlorine taste and odor.
Package Qty 1
Used In Brands Omnipure
Manufacturer's Id Q5515-P
UPC 799932588679
Advertised Size (in) 10 x 2-1/2
Media Block GAC with Lead Specific Media and Scale Inhibitor
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 1,250
Filter Life (liters) 4,731.76
Filter Life (months) 12 months
Micron Rating (Nominal) 1
Maximum Operating Pressure (psi) 125
Operating Temperature (°F) 35 - 100
Operating Temperature (°C) 1.7 - 37.8
Flow Rate (gpm) 0.5
Flow Rate (lpm) 1.893

Reduced Contaminants

The OMNIPURE-Q5515-P reduces the following contaminants:

  • Fluoride NF

The OMNIPURE-Q5515-P is comparable with the following part numbers

Q5515
Q5515P
Q5515-P

Instructions

  1. Omnipure Q5515-P water filters should be installed on cold water lines only
  2. Omnipure Q5515-P water filters should not be used where the water is microbiologically unsafe
  3. Each time you change your filter, clean and apply silicone food grade lubricant (such as OR-LUBRICANT-LG or OR-LUBRICANT-SM) generously to both the small and large o-ring in the Q-Series Head
  4. It is recommended that you replace the Omnipure H-118 O-Ring every time you change your filter
  5. The H-118 O-Ring is the larger of the two o-rings in the Q-Series Head System
  6. If you do not replace the H-118 O-Ring, you may experience leaking because the o-ring adjusts to the shape of the old filter, which may be slightly different than the new filter
  7. The Omnipure H-011 O-Ring is the smaller o-ring in the Q-Series Head

Reset Instructions