Omnipure Q5528 Q-Series GAC Water Filter

SKU
OMNIPURE-Q5528
Price $16.79
Availability: In stock
Choose a quantity
  • 1 Filter $16.79  
  • 3 Filters Price $15.59 each
  • 6 Filters Price $15.09 each
The Omnipure Q5528 RO Prefilter is very user-friendly. Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist. The new Q5528 filter body is just as easily threaded into the head and the replacement is then complete. The Omnipure Q5528 is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head. The Omnipure Q5528 Water Filter can be used in icemakers, refrigerators, beverage equipment, drinking fountains, undersink systems, and reverse osmosis systems. The Omnipure Q5528 GAC water filter is a granular activated carbon filter used to reduce taste, odor and chlorine taste and odor.
Package Qty 1
Used In Brands Omnipure
Manufacturer's Id Q5528
UPC 799932588723
Advertised Size (in) 10 x 2-1/2
Mesh Size 20 x 50
Media GAC Mesh
Primary Filter Media Granular Activated Carbon
Filter Life (gallons) 2,000
Filter Life (liters) 7,570.82
Filter Life (months) 12 months
Maximum Operating Pressure (psi) 125
Operating Temperature (°F) 35 - 100
Operating Temperature (°C) 1.7 - 37.8
Flow Rate (gpm) 0.5
Flow Rate (lpm) 1.893

The OMNIPURE-Q5528 is comparable with the following part numbers

Q5528

Instructions

  1. Omnipure Q5528 water filters should be installed on cold water lines only
  2. Omnipure Q5528 water filters should not be used where the water is microbiologically unsafe
  3. Each time you change your filter, clean and apply silicone food grade lubricant (such as OR-LUBRICANT-LG or OR-LUBRICANT-SM) generously to both the small and large o-ring in the Q-Series Head
  4. It is recommended that you replace the Omnipure H-118 O-Ring every time you change your filter
  5. The H-118 O-Ring is the larger of the two o-rings in the Q-Series Head System
  6. If you do not replace the H-118 O-Ring, you may experience leaking because the o-ring adjusts to the shape of the old filter, which may be slightly different than the new filter
  7. The Omnipure H-011 O-Ring is the smaller o-ring in the Q-Series Head

Reset Instructions