Omnipure Q5620-P Phosphate Carbon Block Water Filter

SKU
OMNIPURE-Q5620-P
Price $28.89
Availability: In stock
Choose a quantity
  • 1 Filter $28.89  
  • 3 Filters Price $26.59 each
  • 6 Filters Price $25.79 each
The Omnipure Q5620-P is a 1 micron Carbon Block Water Filter with Phosphate Scale Inhibitor. The Omnipure Q5620-P Carbon Block Scale Inhibitor water filter is very user-friendly. Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist. The new Q5620-P filter body is just as easily threaded into the head and the replacement is then complete. The Omnipure Q5620-P is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head. The Omnipure Q5620-P can be used as a pre or postfilter for Reverse Osmosis Systems, beverage equipment, drinking water fountains, ice machines, and other point-of-use applications. The Omnipure Q5620-P GAC water filter is a granular activated carbon block filter with phosphate used to reduce cysts, scale, taste, odor and chlorine taste and odor.
Package Qty 1
Used In Brands Omnipure
Manufacturer's Id Q5620-P
UPC 799932588877
Advertised Size (in) 12 x 2-1/2
Media Block GAC with Polyphosphate
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 2,500
Filter Life (liters) 9,463.53
Filter Life (months) 6 months
Micron Rating (Nominal) 1
Maximum Operating Pressure (psi) 125
Operating Temperature (°F) 35 - 100
Operating Temperature (°C) 1.7 - 37.8
Flow Rate (gpm) 0.5
Flow Rate (lpm) 1.893

The OMNIPURE-Q5620-P is comparable with the following part numbers

Q5620
Q5620P
Q5620-P

Instructions

  1. Omnipure Q5620-P water filters should be installed on cold water lines only
  2. Omnipure Q5620-P water filters should not be used where the water is microbiologically unsafe
  3. Each time you change your filter, clean and apply silicone food grade lubricant (such as OR-LUBRICANT-LG or OR-LUBRICANT-SM) generously to both the small and large o-ring in the Q-Series Head
  4. It is recommended that you replace the Omnipure H-118 O-Ring every time you change your filter
  5. The H-118 O-Ring is the larger of the two o-rings in the Q-Series Head System
  6. If you do not replace the H-118 O-Ring, you may experience leaking because the o-ring adjusts to the shape of the old filter, which may be slightly different than the new filter
  7. The Omnipure H-011 O-Ring is the smaller o-ring in the Q-Series Head

Reset Instructions