Omnipure SL10-C Inline Water Filter
Omnipure SL10 2-inch x 10-inch All Phosphate Inline Filters come in different inlet/outlet sizes. The Omnipure SL10-C inline filter has a 3/8-inch FPT connection. The Omnipure SL10-C Water Filter can be used in ice machines, water coolers, drinking fountains, undersink systems, and reverse osmosis systems. You may also purchase fittings if your current fittings are worn out. The Omnipure SL10-C inline filter has no glues or binders, which may cause contamination, used in the manufacturing process. Instead, components are friction-welded together, producing a reliable, no-leak seal. The Omnipure SL10-C inline water filter has threaded connections which are precision cut by machine resulting in the most accurate and repeatable thread possible. The Omnipure SL10-C inline water filters contain polyphosphate to control lime and scale deposits.
|Actual Size (in)||10 inches (length) x 2 inches (outside diameter)|
|Actual Size (cm)||25.4 x 5.08|
|Media||Polyphosphate Scale Inhibitor|
|Primary Filter Media||Phosphate Crystal|
|Filter Life (months)||6 months|
|Operating Pressure (psi)||1 - 125|
|Operating Temperature (°F)||33 - 100|
|Operating Temperature (°C)||0.6 - 37.8|
|Flow Rate (gpm)||0.5|
|Flow Rate (lpm)||1.89|
|Fitting Size (inches)||3/8 inch|
The OMNIPURE-SL10-C reduces the following contaminants:
- Hard Scale
The OMNIPURE-SL10-C is comparable with the following part numbers
- Install on cold water lines only.
- Do not use where water is microbiologically unsafe.