select Compare (0)
Compare Products

You have no items to compare.

Pentek Arsenic Reduction Water Filtration System AS-301E

More Views

Pentek Arsenic Reduction Water Filtration System AS-301E

0 0
This item is no longer available.
  • Genuine OEM Product
  • Arsenic Water Filtration System AS-301E Specs:
  • 3 Stage Arsenic Reduction System
  • Pressure Range: 2.1 ï¾– 8.62 bar (30 ï¾– 125 psi)
  • Temperature Range: 4.4 ï¾– 37.8 C (40 ï¾– 100 F)
  • Service Flow Rate @60 psi (4.1 bar): 2.3 Lpm at 4.1 bar 0.6 gpm
  • Rated Service Life: 3,785 L (1000 gallons)
  • Dimensions: 394 mm x 133 mm x 356 mm (15.5 in. x 5.25 in. x 14 in.)
  • Weight (filled with water): 19 lbs.
  • AS-301E System Recommended Accessory:
  • Use the SW-1 housing wrench to remove the housing sumps. The wrench should NOT be used to tighten the housing sumps back onto the housing caps. Tightening may cause damage to the o-ring. The wrench is not included with the original system purchase.
  • AS-301E Arsenic Reduction Replacement Water Filters:
  • The AS-CK water filters are the replacement filter cartridge kit for the Arsenic Reduction System AS-301E. However, the Pentek AS-CK replacement filter set has been discontinued. The Crystal Quest CQE-RC-04008 arsenic filter cartridge will fit in the first and second housing in the AS-301E.
  • The EP10-10-WF filter will fit in the 3rd housing in the AS-301E.
  • Filter cartridge life is approximately 1000 gallons or 1 year. The filter cartridge life also depends on the quality of your water and the amount of water used.
  • AS-301E System Replacements Parts:
  • 151121 OR-233 Replacement O-Rings. The O-Ring seals the cap to the sump and should be replaced periodically to prevent leaks. The system comes with all the OR-233 o-rings needed for initial installation.